Description
The WAGO 858-390 relay module features Nominal input voltage: 24 VDC, 4 changeover contacts, Limiting continuous current: 6 A, with manual operation, Red status indicator, Module width: 31 mm, 1,50 mm².
Specifications
- Nominal input voltage UN: 24 VDC
- Input voltage range: -10 … +30 %
- Nominal input current at UN: 32 mA
- Number of changeover contacts: 4
- Contact material (relay): AgNi 90/10
- Limiting continuous current: 6 A
- Inrush current (resistive) max.: (AC) 12 A / 0.02 s
- Switching Voltage, Max.: 250 VAC
- Switching power (resistive) max.: AC 1500 VA; DC (see load limit curve)
- Recommended minimum load: 12 V / 10 mA
- Pull-in time (typ.): 15 ms
- Drop-out time (typ.): 18 ms
- Bounce time (typ.): 8 ms
- Electrical life (NO; resistive load; 23 °C): 100 x 10³ switching operations
- Mechanical life: 30 x 10⁶ switching operations
- Switching frequency with/without load (max.): 6 min-1 / 60 min-1
- Status indicator: Red LED; Mechanical
- Rated Voltage: 300 V
- Rated impulse withstand voltage: 2.5 kV
- Overvoltage category: II
- Pollution degree: 2
- Dielectric strength (control/load circuit) (AC, 1 min): 2.5 kVrms
- Dielectric strength (open contact) (AC, 1 min): 1.2 kVrms
- Dielectric strength (load/load circuit) (AC, 1 min): 2 kVrms
- Insulation type (control/load circuit): Basic insulation
- Insulation type (open contact): Functional insulation
- Insulation type (load/load circuit): Basic insulation
- Insulation type (adjacent devices): Reinforced insulation (safe isolation)
- protection rating: IP20
- Connection Data — Connection technology: Push-in CAGE CLAMP®
- Connection Data — Solid conductor: 0.34 … 1.5 mm² / 22 … 16 AWG
- Connection Data — Fine-stranded conductor: 0.34 … 1.5 mm² / 22 … 16 AWG
- Connection Data — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
- Connection Data — Note (conductor cross-section): 2 x 0.34 … 2 x 1.5 mm² / 1 x 2.5 mm² / 2 x 22 … 2 x 16 AWG
- Width: 31 mm / 1.22 inches
- Height: 97 mm / 3.819 inches
- Depth from upper-edge of DIN-rail: 55 mm / 2.165 inches
- Mounting type: DIN-35 rail
- Mounting position: horizontal (standing/lying); vertical
- Weight: 87.2 g
- Ambient temperature (operation at UN): -40 … +70 °C
- Ambient temperature UL (operation at UN): -40 … 50 °C
- Ambient temperature (storage): -40 … +85 °C
- Processing temperature: -25 … +50 °C
- Temperature range of connection cable: ≥ (Tambient + 25 K)
- Relative humidity: 5 … 85 %
- Operating altitude (max.): 2000 m
- Standards/specifications: EN 61010-2-201; EN 61810-1; EN 61373; UL 508 (max. 50 °C)
- WAGO Basic Relay: 858-159
Image shown is representative. Refer to the product specifications for the exact configuration.