null

WAGO 857-357 Relay module, Nominal input voltage: 115 V AC/DC, 1 changeover contact, Limiting continuous current: 6 A, Yellow status indicator, Module width: 6 mm, 2,50 mm², gray

$28.82
SKU:
857-357
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 857-357 relay module features Nominal input voltage: 115 V AC/DC, 1 changeover contact, Limiting continuous current: 6 A, Yellow status indicator, Module width: 6 mm, 2,50 mm², gray.

Specifications

  • Nominal input voltage UN: 115 VAC/VDC
  • Input voltage range: ±20 %
  • Nominal input current at UN: 4 mA
  • Nominal frequency range (input voltage): 50 … 60 HzAC / 0 HzDC
  • Number of changeover contacts: 1
  • Contact material (relay): AgSnO2
  • Limiting continuous current: 6 A
  • Inrush current (resistive) max.: (AC) 20 A / 0.02 s
  • Switching Voltage, Max.: 250 VAC
  • Switching power (resistive) max.: AC 1500 VA; DC (see load limit curve)
  • Utilization category: AC-15: 3 A / 250 VAC; DC-13: 2 A / DC 24 V
  • Recommended minimum load: 10 V / 10 mA; 24 V / 1 mA
  • Pull-in time (typ.): 15 ms
  • Drop-out time (typ.): 25 ms
  • Bounce time (typ.): 3.5 ms
  • Electrical life (NO; resistive load; 23 °C): 50 x 10³ switching operations
  • Mechanical life: 5 x 10⁶ switching operations
  • Switching frequency with/without load (max.): 6 min-1 / 180 min-1
  • Status indicator: Yellow LED
  • Rated Voltage: 300 V
  • Rated impulse withstand voltage: 4 kV
  • Type of circuits: Mains circuits
  • Overvoltage category: III
  • Pollution degree: 2
  • Dielectric strength (control/load circuit) (AC, 1 min): 3.51 kVrms
  • Dielectric strength (open contact) (AC, 1 min): 1 kVrms
  • Insulation type (control/load circuit): Reinforced insulation (safe isolation)
  • Insulation type (between adjacent devices of the same type): Double insulation (safe isolation)
  • Insulation type (to adjacent devices of different types): Basic insulation
  • Safety Information: Adjacent devices of the same type are devices of the same design (series) that are arranged next to one another on the DIN-rail with the same orientation. An end stop (249-116) must be fitted to devices of other types for compliance with the reinforced insulation requirements.
  • protection rating: IP20
  • Connection Data — Connection technology: Push-in CAGE CLAMP®
  • Connection Data — Solid conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
  • Connection Data — Fine-stranded conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
  • Connection Data — Fine-stranded conductor; with insulated ferrule: 0.34 … 1.5 mm² / 22 … 16 AWG
  • Connection Data — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
  • Width: 6 mm / 0.236 inches
  • Height: 94 mm / 3.701 inches
  • Depth from upper-edge of DIN-rail: 81 mm / 3.189 inches
  • Mounting type: DIN-35 rail
  • Mounting position: Horizontal (standing/lying); vertical
  • Color: gray
  • Insulation material (main housing): Polyamide (PA66)
  • Flammability class per UL94: V0
  • Weight: 32.2 g
  • Ambient temperature (operation at UN): -40 … +60 °C
  • Ambient temperature (storage): -40 … +70 °C
  • Processing temperature: -25 … +50 °C
  • Temperature range of connection cable: ≥ (Tambient + 30 K)
  • Relative humidity: 5 … 85 % (no condensation permissible)
  • Operating altitude (max.): 2000 m
  • Standards/specifications: EN 61010-2-201; EN 61810-1; EN 61373; UL 508; ATEX; IECEx
  • WAGO Basic Relay: 857-155

Image shown is representative. Refer to the product specifications for the exact configuration.