Description
The WAGO 857-104 relay socket features Nominal input voltage: 24 V AC/DC, for 5 mm basic relays, Yellow status indicator.
Specifications
- Nominal input voltage UN: 24 VAC/VDC
- Limiting continuous current: 6 A
- Switching Voltage, Max.: 250 VAC
- Status indicator: Yellow LED
- Rated Voltage: 300 V
- Rated impulse withstand voltage: 4 kV
- Type of circuits: Mains circuits
- Overvoltage category: III
- Pollution degree: 2
- Dielectric strength (control/load circuit) (AC, 1 min): 3.51 kVrms
- Dielectric strength (open contact) (AC, 1 min): 1 kVrms
- Insulation type (control/load circuit): Reinforced insulation (safe isolation)
- Insulation type (between adjacent devices of the same type): Reinforced insulation (safe isolation)
- protection rating: IP20
- Connection Data — Connection technology: Push-in CAGE CLAMP®
- Connection Data — Solid conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
- Connection Data — Fine-stranded conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
- Connection Data — Fine-stranded conductor; with insulated ferrule: 0.34 … 1.5 mm² / 22 … 16 AWG
- Connection Data — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
- Width: 6 mm / 0.236 inches
- Height: 94 mm / 3.701 inches
- Depth from upper-edge of DIN-rail: 81 mm / 3.189 inches
- Mounting type: DIN-35 rail
- Mounting position: Horizontal (standing/lying); vertical
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 26.3 g
- Ambient temperature (operation at UN): -40 … +70 °C
- Ambient temperature (storage): -40 … +70 °C
- Processing temperature: -25 … +50 °C
- Temperature range of connection cable: ≥ (Tambient + 30 K)
- Relative humidity: 5 … 85 % (no condensation permissible)
- Operating altitude (max.): 2000 m
- Standards/specifications: EN 61010-2-201; UR
Image shown is representative. Refer to the product specifications for the exact configuration.