Description
The WAGO 832-3622 tHT male header features 1.2 x 1.2 mm solder pin, angled (0° to PCB), Pin spacing 10.16 mm, 2-pole.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60664-1
- IEC Approvals — Rated voltage (III / 3): 800 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 8 kV
- IEC Approvals — Rated voltage (III/2): 1000 V
- IEC Approvals — Rated impulse withstand voltage (III/2): 8 kV
- IEC Approvals — Nominal voltage (II/2): 1000 V
- IEC Approvals — Rated impulse withstand voltage (II/2): 8 kV
- IEC Approvals — Rated current: 76 A
- IEC Approvals — Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
- UL Approvals — Approvals per: UL 1059
- UL Approvals — Rated voltage UL (Use Group B): 300 V
- UL Approvals — Rated current UL (Use Group B): 66 A
- UL Approvals — Rated voltage UL (Use Group C): 300 V
- UL Approvals — Rated current UL (Use Group C): 66 A
- UL Approvals — Rated voltage UL (Use Group D): 600 V
- UL Approvals — Rated current UL (Use Group D): 5 A
- Ratings per UL 1977 — Rated voltage (UL 1977): 600 V
- Ratings per UL 1977 — Rated current UL 1977: 85 A
- Approvals per: CSA
- Rated voltage CSA (Use Group B): 300 V
- Rated current CSA (Use Group B): 66 A
- Rated voltage CSA (Use Group C): 300 V
- Rated current CSA (Use Group C): 66 A
- Rated voltage CSA (Use Group D): 600 V
- Rated current CSA (Use Group D): 5 A
- Connection Data — Total number of potentials: 2
- Connection Data — Number of connection types: 1
- Connection Data — Number of levels: 1
- Connection 1 — Number of poles: 2
- Pin spacing: 10.16 mm / 0.4 inches
- Width: 21.62 mm / 0.851 inches
- Height: 20.5 mm / 0.807 inches
- Height from the surface: 16.5 mm / 0.65 inches
- Depth: 32 mm / 1.26 inches
- Solder pin length: 4 mm
- Solder pin dimensions: 1.2 x 1.2 mm
- Drilled hole diameter: 1.7 (+0.1) mm
- Anti-rotation protection: Yes
- Contact type (pluggable connector): Male header
- Connector (connection type): for PCB
- Mismating protection: Yes
- Plugging without loss of pin spacing: No
- Mating direction to the PCB: 0 °
- Locking of plug-in connection: none
- PCB contact: THT
- Solder pin arrangement: over the entire male connector (in-line)
- Number of solder pins per potential: 3
- Color: light gray
- Insulation material (main housing): Polybutylene terephthalate (PBT)
- Flammability class per UL94: V0
- Contact material: Electrolytic copper (ECu)
- Weight: 11.1 g
- Limit temperature range: -60 … +120 °C
- Ambient temperature (installation): -35 … +60 °C
- Processing temperature: -35 … +60 °C
Image shown is representative. Refer to the product specifications for the exact configuration.