Description
The WAGO 812-103 busbar terminal block features for (10 x 3) mm busbars, without push-buttons, Push-in CAGE CLAMP®, red.
Specifications
- IEC Approvals — Rated voltage (III / 3): 1000 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 6 kV
- IEC Approvals — Rated current: 96 A
- IEC Approvals — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
- Ratings per IEC/EN – Notes — Rated current (note): Current carrying capacity: With a maximum total current of 96 A, the clamping units of the busbar terminal block can be loaded with the rated current of the conductor cross-sections approved. This only applies when (10 x 3) mm busbars are used.
- General information — Wiring direction: Front-entry wiring
- Connection Data — Clamping units: 12
- Connection Data — Total number of potentials: 1
- Connection Data — Number of levels: 1
- Connection 1 — Connection technology: Push-in CAGE CLAMP®
- Connection 1 — Actuation Method: Operating tool
- Connection 1 — Connectable conductor materials: Copper
- Connection 1 — Solid conductor: 0.5 … 4 mm² / 20 … 12 AWG
- Connection 1 — Solid conductor; push-in termination: 0.5 … 4 mm² / 20 … 12 AWG
- Connection 1 — Stranded conductor: 0.5 … 4 mm² / 20 … 12 AWG
- Connection 1 — Fine-stranded conductor: 0.5 … 4 mm² / 20 … 12 AWG
- Connection 1 — Strip length: 11 mm / 0.43 inches
- Connection 1 — Wiring direction: Front-entry wiring
- Width: 75 mm / 2.953 inches
- Height: 30 mm / 1.181 inches
- Depth: 27.5 mm / 1.083 inches
- Color: red
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 35.7 g
- Continuous operating temperature: -35 … +85 °C
Image shown is representative. Refer to the product specifications for the exact configuration.