Description
The WAGO 805-116 pCB terminal block features push-button, 1.5 mm², Pin spacing 3.5 mm, 16-pole, Push-in CAGE CLAMP®, with test port, gray.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60664-1
- IEC Approvals — Rated voltage (III / 3): 250 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 4 kV
- IEC Approvals — Rated voltage (III/2): 320 V
- IEC Approvals — Rated impulse withstand voltage (III/2): 4 kV
- IEC Approvals — Nominal voltage (II/2): 630 V
- IEC Approvals — Rated impulse withstand voltage (II/2): 4 kV
- IEC Approvals — Rated current: 17.5 A
- IEC Approvals — Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
- UL Approvals — Approvals per: UL 1059
- UL Approvals — Rated voltage UL (Use Group B): 300 V
- UL Approvals — Rated current UL (Use Group B): 10 A
- UL Approvals — Rated voltage UL (Use Group C): 150 V
- UL Approvals — Rated current UL (Use Group C): 10 A
- UL Approvals — Rated voltage UL (Use Group D): 300 V
- UL Approvals — Rated current UL (Use Group D): 10 A
- Connection Data — Clamping units: 16
- Connection Data — Total number of potentials: 16
- Connection Data — Number of connection types: 1
- Connection Data — Number of levels: 1
- Connection Data — Number of test slots: 1
- Connection 1 — Connection technology: Push-in CAGE CLAMP®
- Connection 1 — Actuation Method: Push-button
- Connection 1 — Solid conductor: 0.2 … 1.5 mm² / 24 … 16 AWG
- Connection 1 — Fine-stranded conductor: 0.2 … 1.5 mm² / 24 … 16 AWG
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.25 … 1 mm²
- Connection 1 — Fine-stranded conductor; with uninsulated ferrule: 0.25 … 1 mm²
- Connection 1 — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
- Connection 1 — Conductor connection direction to PCB: 0 °
- Connection 1 — Number of poles: 16
- Pin spacing: 3.5 mm / 0.138 inches
- Width: 57.5 mm / 2.264 inches
- Height: 13.7 mm / 0.539 inches
- Height from the surface: 10.5 mm / 0.413 inches
- Depth: 13.6 mm / 0.535 inches
- Solder pin length: 3.2 mm
- Solder pin dimensions: 0.5 x 0.75 mm
- Drilled hole diameter: 1.1 (+0.1) mm
- PCB contact: THT
- Solder pin arrangement: over the entire terminal strip (staggered)
- Number of solder pins per potential: 1
- Color: gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Contact material: Electrolytic copper (ECu)
- Weight: 7.2 g
- Limit temperature range: -60 … +105 °C
- Ambient temperature (installation): -35 … +60 °C
Installation: Supply with WAGO installation instructions and follow the manufacturer’s technical ratings and installation requirements.
Image shown is representative. Refer to the product specifications for the exact configuration.