Description
The WAGO 789-325 relay module features Nominal input voltage: 24 VDC, 1 make contact, Limiting continuous current: 16 A, for lamp loads, Manual/0FF/Auto switch, Red status indicator, Module width: 18 mm.
Specifications
- Nominal input voltage UN: 24 VDC
- Input voltage range: -15 … +20 %
- Nominal input current at UN: 19 mA
- Nominal voltage (feedback contact): 24 VDC (SELV/PELV)
- Power loss (max.) Pl (max.): 0.7 W
- Number of make/switch-on contacts: 1
- Contact material (relay): AgSnO2
- Limiting continuous current: 16 A
- Inrush current (resistive) max.: (AC) 120 A / 0.05 s
- Switching Voltage, Max.: 250 VAC
- Switching power (resistive) max.: AC 4000 VA
- Recommended minimum load: 12 V / 10 mA
- Pull-in time (typ.): 15 ms
- Drop-out time (typ.): 5 ms
- Electrical life (NO; resistive load; 23 °C): 100 x 10³ switching operations
- Mechanical life: 10 x 10⁶ switching operations
- Switching voltage (max.) (signal contact): 30 VAC / 60 VDC
- Limiting continuous current (signal contact): 4 A
- Status indicator: Red LED
- Rated Voltage: 300 V
- Overvoltage category: III
- Pollution degree: 2
- Dielectric strength (control/load circuit) (AC, 1 min): 4 kVrms
- Dielectric strength (open contact) (AC, 1 min): 1 kVrms
- Insulation type (control/load circuit): Reinforced insulation (safe isolation)
- Insulation type (open contact): Functional insulation
- Insulation type (load circuit/signal contact): Reinforced insulation (safe isolation)
- Insulation type (control circuit/signal contact): Basic insulation (100 V working voltage); overvoltage category II
- Insulation type (adjacent devices): Reinforced insulation (safe isolation)
- protection rating: IP20
- Connection Data — Connection technology: CAGE CLAMP®
- Connection Data — Solid conductor: 0.2 … 2.5 mm² / 24 … 14 AWG
- Connection Data — Fine-stranded conductor: 0.2 … 2.5 mm² / 24 … 14 AWG
- Connection Data — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
- Width: 17.5 mm / 0.689 inches
- Height: 90 mm / 3.543 inches
- Depth from upper-edge of DIN-rail: 55 mm / 2.165 inches
- Housing design: DIN-rail-mount enclosure
- Mounting type: DIN-35 rail
- Weight: 57.8 g
- Ambient temperature (operation at UN): -20 … +40 °C
- Ambient temperature (storage): -40 … +70 °C
- Processing temperature: -25 … +50 °C
- Temperature range of connection cable: ≥ (Tambient + 30 K)
- Relative humidity: ≤ 75 % (no condensation permissible)
- Operating altitude (max.): 2000 m
- Standards/specifications: EN 61010-2-201
Image shown is representative. Refer to the product specifications for the exact configuration.