Description
The WAGO 789-1549 relay module features Nominal input voltage: 230 VAC, 2 changeover contacts, Limiting continuous current: 8 A, with manual operation, Red status indicator, Module width: 18 mm, 2,50 mm².
Specifications
- Nominal input voltage UN: 230 VAC
- Input voltage range: ±10 %
- Nominal input current at UN: 4 mA
- Number of changeover contacts: 2
- Contact material (relay): AgNi
- Limiting continuous current: 8 A
- Inrush current (resistive) max.: (AC) 16 A / 0.02 s; (AC) 12 A / 4 s
- Switching Voltage, Max.: 250 VAC
- Switching power (resistive) max.: AC 2000 VA; DC (see load limit curve)
- Recommended minimum load: 12 V / 10 mA
- Pull-in time (typ.): 15 ms
- Drop-out time (typ.): 8 ms
- Bounce time (typ.): 7 ms
- Mechanical life: 5 x 10⁶ switching operations
- Status indicator: Red LED
- Rated Voltage: 250 V
- Rated impulse withstand voltage: 4 kV
- Pollution degree: 2
- Dielectric strength (control/load circuit) (AC, 1 min): 3.5 kVrms
- Dielectric strength (open contact) (AC, 1 min): 1 kVrms
- Dielectric strength (load/load circuit) (AC, 1 min): 1.5 kVrms
- protection rating: IP20
- Connection Data — Connection technology: CAGE CLAMP®
- Connection Data — Solid conductor: 0.2 … 2.5 mm² / 24 … 14 AWG
- Connection Data — Fine-stranded conductor: 0.2 … 2.5 mm² / 24 … 14 AWG
- Connection Data — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
- Width: 17.5 mm / 0.689 inches
- Height: 90 mm / 3.543 inches
- Depth from upper-edge of DIN-rail: 55 mm / 2.165 inches
- Housing design: DIN-rail-mount enclosure
- Mounting type: DIN-35 rail
- Weight: 59.5 g
- Ambient temperature (operation at UN): -25 … +50 °C
- Ambient temperature (storage): -40 … +70 °C
- Processing temperature: -25 … +50 °C
- Standards/specifications: EN 60664-1
Image shown is representative. Refer to the product specifications for the exact configuration.