Description
The WAGO 788-608 relay socket with relay and status indicator features Compact terminal block, 2-pole, CCO, 230 VAC.
Specifications
- Nominal input voltage UN: 230 VAC
- Input voltage range: ±10 %
- Nominal input current at UN: 5 mA
- Number of changeover contacts: 1
- Contact material (relay): AgNi + Au
- Limiting continuous current: 16 A
- Switching Voltage, Max.: 250 VAC
- Switching power (resistive) max.: AC 4000 VA; DC (see load limit curve)
- Utilization category: AC-15: 6 A / 250 VAC; DC-13: 2 A / DC 24 V
- Recommended minimum load: 5 V / 2 mA / 50 mW
- Pull-in time (typ.): 7 ms
- Drop-out time (typ.): 3 ms
- Bounce time (typ.): 6 ms
- Electrical life (NO; resistive load; 23 °C): 70 x 10³ switching operations
- Mechanical life: 30 x 10⁶ switching operations
- Switching frequency with/without load (max.): 10 min-1 / 1200 min-1
- Status indicator: Red LED
- Rated Voltage: 250 V
- Rated impulse withstand voltage: 4 kV
- Pollution degree: 3
- Dielectric strength (control/load circuit) (AC, 1 min): 5 kVrms
- Dielectric strength (open contact) (AC, 1 min): 1 kVrms
- Safety Information: A separator plate (e.g., 209-191) must be used for voltages exceeding 250 V between adjacent relay modules and to comply with reinforced insulation requirements.
- protection rating: IP20
- Connection Data — Connection technology: Push-in CAGE CLAMP®
- Connection Data — Solid conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
- Connection Data — Fine-stranded conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
- Connection Data — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
- Width: 15 mm / 0.591 inches
- Height: 86 mm / 3.386 inches
- Depth from upper-edge of DIN-rail: 54 mm / 2.126 inches
- Mounting type: DIN-35 rail
- Color: gray
- Weight: 47.8 g
- Ambient temperature (operation at UN): -40 … +70 °C
- Ambient temperature UL (operation at UN): -40 … +50 °C
- Ambient temperature (storage): -40 … +70 °C
- Processing temperature: -25 … +50 °C
- Temperature range of connection cable: ≥ (Tambient + 20 K)
- Standards/specifications: EN 61010-2-201; EN 61810-1; EN 61373; UL 508; DNV
- WAGO Basic Relay: 788-179
Image shown is representative. Refer to the product specifications for the exact configuration.