null

WAGO 788-512 Relay module, Nominal input voltage: 24 VAC, 2 changeover contacts, Limiting continuous current: 8 A, Red status indicator, Module width: 15 mm, 2,50 mm², gray

$24.33
SKU:
788-512
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 788-512 relay module features Nominal input voltage: 24 VAC, 2 changeover contacts, Limiting continuous current: 8 A, Red status indicator, Module width: 15 mm, 2,50 mm², gray.

Specifications

  • Nominal input voltage UN: 24 VAC
  • Input voltage range: ±10 %
  • Nominal input current at UN: 34 mA
  • Number of changeover contacts: 2
  • Contact material (relay): AgNi 90/10
  • Limiting continuous current: 8 A
  • Inrush current (resistive) max.: (AC) 15 A / 4 s
  • Switching Voltage, Max.: 250 VAC
  • Switching power (resistive) max.: AC 2000 VA; DC (see load limit curve)
  • Utilization category: AC-15: 3 A / 250 VAC; DC-13: 2 A / DC 24 V
  • Recommended minimum load: 12 V / 10 mA
  • Pull-in time (typ.): 10 ms
  • Drop-out time (typ.): 35 ms
  • Bounce time (typ.): 10 ms
  • Electrical life (NO; resistive load; 23 °C): 10 x 10³ switching operations
  • Mechanical life: 30 x 10⁶ switching operations
  • Switching frequency with/without load (max.): 6 min-1 / 1200 min-1
  • Status indicator: Red LED
  • Rated Voltage: 250 V
  • Rated impulse withstand voltage: 4 kV
  • Pollution degree: 3
  • Dielectric strength (control/load circuit) (AC, 1 min): 5 kVrms
  • Dielectric strength (open contact) (AC, 1 min): 1 kVrms
  • Dielectric strength (load/load circuit) (AC, 1 min): 2.5 kVrms
  • Safety Information: A separator plate (e.g., 209-191) must be used for voltages exceeding 250 V between adjacent relay modules and to comply with reinforced insulation requirements.
  • protection rating: IP20
  • Connection Data — Connection technology: Push-in CAGE CLAMP®
  • Connection Data — Solid conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
  • Connection Data — Fine-stranded conductor: 0.34 … 2.5 mm² / 22 … 14 AWG
  • Connection Data — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
  • Width: 15 mm / 0.591 inches
  • Height: 86 mm / 3.386 inches
  • Depth from upper-edge of DIN-rail: 54 mm / 2.126 inches
  • Mounting type: DIN-35 rail
  • Color: gray
  • Weight: 47.7 g
  • Ambient temperature (operation at UN): -40 … +70 °C
  • Ambient temperature UL (operation at UN): -40 … +50 °C
  • Ambient temperature (storage): -40 … +70 °C
  • Processing temperature: -25 … +50 °C
  • Temperature range of connection cable: ≥ (Tambient + 20 K)
  • Standards/specifications: EN 61010-2-201; EN 61810-1; EN 61373; UL 508; DNV
  • WAGO Basic Relay: 788-172

Image shown is representative. Refer to the product specifications for the exact configuration.