null

WAGO 787-870 UPS charger and controller, 24 VDC, 10 A

$545.90
SKU:
787-870
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 787-870 uPS charger and controller features 24 VDC, 10 A.

Specifications

  • Nominal input voltage [V]: 24 VDC; DC 24 V
  • Input voltage range: 22 … 29 VDC
  • Nominal mains frequency range: 0 Hz
  • Input current Ii: ≤ 0.1 A (no load); ≤ 0.8 A (charging); ≤ 10.8 A
  • Inrush current: ≤ 4 A (no load)
  • Nominal output voltage [V]: 24 VDC
  • Output voltage range: DC 24 V
  • Nominal output current Io nom: 10 A
  • Current limitation: 1.1 … 1.4 x Io nom (typ.)
  • Buffer time: 10 s … 10 min or constant; adjustable
  • Switch-on threshold: DC 20 … 25.5 V (adjustable)
  • Memory type: Lead-acid fleece
  • Charging current: ≤ 0.6 A
  • End-of-charge voltage: 26 … 29.5 VDC (temperature-controlled; optional fixed setting)
  • Recommended battery module: 787-871, 787-872, 787-873, 787-876, 787-1671
  • Signaling: 1 x DC OK LED (green); 1 x Warning LED (yellow); 1 x Error LED (red); LCD; 3 x Signal output (24 VDC; max. 25 mA); 1 x Isolated relay contact (max. 30 VDC; 1 A); 1 x RS-232 interface; Battery control (C+; C-)
  • Operation status indicator: Green LED (Uo); Yellow LED (warning); Red LED (error)
  • Communications: RS-232 serial interface
  • Remote input: Switching buffer mode off
  • Power loss Pl: ≤ 15 W; ≤ 20 W (nominal load)
  • Efficiency (typ.): 95 %
  • Internal fuse: T 15 A
  • Isolation voltage (connectors – housing): 0.5 kVDC
  • Protection class: III
  • protection rating: IP20; per EN 60529
  • Reverse voltage protection: yes
  • Resistance to reverse feed: ≤ 35 VDC
  • Pollution degree: 2
  • Parallel operation: Yes, max. 3 battery modules for buffer time extension (temperature measurement evaluation is only possible via one battery module)
  • Series operation: No
  • MTBF: > 500,000 h (per IEC 61709)
  • Connection Data — Cable length (max.): 3 m (input, output, battery control)
  • Connection 1 — Connection type: Input/output
  • Connection 1 — Connection technology: CAGE CLAMP®
  • Connection 1 — WAGO connector: WAGO 231 Series
  • Connection 1 — Solid conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Connection 1 — Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Connection 1 — Strip length: 8 … 9 mm / 0.31 … 0.35 inches
  • Connection 2 — Connection type: Signaling
  • Connection 2 — Connection technology: CAGE CLAMP®
  • Connection 2 — WAGO connector: WAGO 733 Series
  • Connection 2 — Solid conductor: 0.08 … 0.5 mm² / 28 … 20 AWG
  • Connection 2 — Fine-stranded conductor: 0.08 … 0.5 mm² / 28 … 20 AWG
  • Connection 2 — Strip length: 5 … 6 mm / 0.2 … 0.24 inches
  • Width: 40 mm / 1.575 inches
  • Height: 163 mm / 6.417 inches
  • Depth from upper-edge of DIN-rail: 163 mm / 6.417 inches
  • Note (dimensions): Height with connector
  • Mounting type: DIN-35 rail
  • Weight: 800 g
  • Ambient temperature (operation): -10 … +60 °C
  • Ambient temperature (storage): -25 … +85 °C
  • Relative humidity: 5 … 96 % (no condensation permissible)
  • Conformity marking: CE
  • Standards/specifications: EN 61010-1; EN 61010-2-201; UL 60950; UL 508; EN 61000-6-2; EN 61000-6-3

Image shown is representative. Refer to the product specifications for the exact configuration.