null

WAGO 787-819 EPSITRON® PRO Power supply, single-phase, output voltage 12 VDC, 6 A, PowerBoost

$517.60
SKU:
787-819
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 787-819 ePSITRON® PRO Power supply features single-phase, output voltage 12 VDC, 6 A, PowerBoost.

Specifications

  • Phases: 1
  • Nominal input voltage [V]: 1 x 100 … 240 VAC
  • Input voltage range: 1 x 85 … 264 VAC; 120 … 300 VDC
  • Input voltage derating: -5 %/V (< 95 VAC)
  • Nominal mains frequency range: 50 … 60 Hz; 0 Hz
  • Input current Ii: ≤ 0.51 A (240 VAC; 6 ADC)
  • Inrush current: ≤ 30 A (peak)
  • Power factor correction (PFC): Passive
  • Mains failure hold-up time: ≥ 70 ms (230 VAC)
  • Nominal output voltage [V]: 12 VDC (SELV)
  • Output voltage range: DC 12 V
  • Default Setting: 12 VDC
  • Nominal output current Io nom: 6 A (12 VDC)
  • Nominal output power: 72 W
  • Deviation: ≤ 1 %
  • Residual ripple: ≤ 70 mV (peak-to-peak)
  • Current limitation: 1.1 x Io nom (typ.)
  • Overload behavior: TopBoost/PowerBoost/Constant current mode
  • PowerBoost: 12 ADC (4 s); 9 ADC (8 s)
  • TopBoost: 21 ADC (25 ms)
  • Signaling: 1 x DC OK LED (green); 1 x Error LED (red); 1 x Stand-by input; 1 x DC OK relay contact (changeover contact)
  • Operation status indicator: Green LED (DC OK); Red LED (error)
  • Power loss Pl: ≤ 0.5 W (standby); ≤ 3 W (no load); ≤ 9.4 W (nominal load)
  • Efficiency (typ.): 83 %
  • Internal fuse: T 2 A / 250 VAC
  • Pre-fuse (required): An external DC fuse is required for the DC input voltage.
  • Backup fuse (recommended): Circuit breaker: 6 A, 10 A, 16 A; Tripping characteristic: B or C
  • Isolation voltage (pri.-sec.): 4.242 kVDC
  • Isolation voltage (pri.-PE): 2.2 kVDC
  • Isolation voltage (sec.-PE): 0.7 kVDC
  • Protection class: I
  • protection rating: IP20; per EN 60529
  • Resistance to reverse feed: ≤ 25 VDC
  • Overvoltage category: II
  • Pollution degree: 2
  • Transient suppression (primary): Varistor
  • Short-circuit-protected: Yes
  • Open-circuit-proof: Yes
  • Parallel operation: Yes
  • Series operation: Yes
  • MTBF: > 500,000 h (per IEC 61709)
  • Connection 1 — Connection type: Input/output
  • Connection 1 — Connection technology: CAGE CLAMP®
  • Connection 1 — WAGO connector: WAGO 231 Series
  • Connection 1 — Solid conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Connection 1 — Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Connection 1 — Strip length: 8 … 9 mm / 0.31 … 0.35 inches
  • Connection 2 — Connection type: Signaling
  • Connection 2 — Connection technology: CAGE CLAMP®
  • Connection 2 — WAGO connector: WAGO 733 Series
  • Connection 2 — Solid conductor: 0.08 … 0.5 mm² / 28 … 20 AWG
  • Connection 2 — Fine-stranded conductor: 0.08 … 0.5 mm² / 28 … 20 AWG
  • Connection 2 — Strip length: 5 … 6 mm / 0.2 … 0.24 inches
  • Width: 40 mm / 1.575 inches
  • Height: 163 mm / 6.417 inches
  • Depth from upper-edge of DIN-rail: 163 mm / 6.417 inches
  • Note (dimensions): Height with connector
  • Mounting type: DIN-35 rail
  • Weight: 800 g
  • Ambient temperature (operation): -25 … +70 °C (Device starts at -40 °C (type-tested))
  • Ambient temperature (storage): -25 … +85 °C
  • Relative humidity: 5 … 96 % (no condensation permissible)
  • Derating: -3 %/K (> 50 °C)
  • Climatic category: 3K3 (per EN 60721)
  • Conformity marking: CE
  • Standards/specifications: EN 61010-1; EN 61010-2-201; EN 61204-3; EN 61558-2-16; UL 60950; UL 508

Image shown is representative. Refer to the product specifications for the exact configuration.