null

WAGO 787-732 EPSITRON® ECO power supply, single-phase, output voltage 24 VDC, 10 A

$232.70
SKU:
787-732
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 787-732 ePSITRON® ECO power supply features single-phase, output voltage 24 VDC, 10 A.

Specifications

  • Phases: 1
  • Nominal input voltage [V]: 1 x 110 … 240 VAC
  • Input voltage range: 1 x 100 … 264 VAC
  • Nominal mains frequency range: 47 … 63 Hz; 0 Hz
  • Input current Ii: ≤ 1.2 A (230 VAC); ≤ 3.2 A (115 VAC)
  • Power factor correction (PFC): Active
  • Nominal output voltage [V]: 24 VDC (SELV)
  • Default Setting: 24 VDC
  • Nominal output current Io nom: 10 A (24 VDC)
  • Nominal output power: 240 W
  • Deviation: ≤ 1 %
  • Overload behavior: Constant power (in overload range: 1.15 … 1.4 x Io nom); Shutdown and automatic restart in the event of a short circuit
  • Signaling: 1 x DC OK LED (green); 1 x Overload LED (red)
  • Operation status indicator: Green LED (24 VDC OK); Red LED (overload)
  • Power loss Pl: ≤ 37.5 W (230 VAC; nominal load)
  • Power loss (max.) Pl (max.): 53 W (110 VAC / 24 VDC; 11 A)
  • Efficiency (typ.): 86 % (230 VAC)
  • Internal fuse: F 5 A / 250 VAC
  • Backup fuse (recommended): Circuit breaker: 10 A, 16 A; Tripping characteristic: B or C
  • Isolation voltage (pri.-sec., AC): 3,000 V
  • Isolation voltage (pri.-PE, AC): 1,500 V
  • Protection class: I
  • protection rating: IP20; per EN 60529
  • Overvoltage category: II
  • Pollution degree: 2
  • Transient suppression (primary): Varistor
  • Short-circuit-protected: Yes
  • Open-circuit-proof: Yes
  • Parallel operation: Yes
  • Series operation: Yes
  • Connection Data — Note (conductor cross-section): 12 AWG: THHN, THWN
  • Connection 1 — Connection type: Input/output
  • Connection 1 — Connection technology: CAGE CLAMP®
  • Connection 1 — WAGO connector: WAGO 745 Series
  • Connection 1 — Solid conductor: 0.08 … 4 mm² / 28 … 12 AWG
  • Connection 1 — Fine-stranded conductor: 0.08 … 4 mm² / 28 … 12 AWG
  • Connection 1 — Strip length: 8 … 9 mm / 0.31 … 0.35 inches
  • Width: 110 mm / 4.331 inches
  • Height: 136 mm / 5.354 inches
  • Depth from upper-edge of DIN-rail: 92 mm / 3.622 inches
  • Mounting type: DIN-35 rail
  • Weight: 1200 g
  • Ambient temperature (operation): -10 … +70 °C
  • Ambient temperature (storage): -25 … +85 °C
  • Relative humidity: 10 … 95 % (no condensation permissible)
  • Derating: -2.33 %/K (> 40 °C; 230 VAC)
  • Climatic category: 3K3 (per EN 60721)
  • Conformity marking: CE; UKCA
  • Standards/specifications: EN 61010-1; EN 61204-3; UL 61010-1; UL 61010-2-201; UL 121201; SEMI F47; EN IEC 61010-2-201

Image shown is representative. Refer to the product specifications for the exact configuration.