null

WAGO 787-1685 Redundancy module, 24 VDC, 20 A

$420.20
SKU:
787-1685
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 787-1685 redundancy module features 24 VDC, 20 A.

Specifications

  • Nominal input voltage [V]: DC 24 V
  • Input voltage range: 2 x 10 … 36 VDC
  • Nominal mains frequency range: 0 Hz
  • Input current Ii: ≤ 40 A (per path); ≤ 40 A (in total)
  • PowerBoost input: DC 60 A (4 s); DC 50 A (8 s)
  • TopBoost input: DC 100 A (50 ms)
  • Nominal output voltage [V]: 24 VDC
  • Output voltage range: DC 24 V
  • Voltage drop: ≤ 100 mV (Input/output)
  • Nominal output current Io nom: 40 A (redundancy operation); 40 A (parallel operation)
  • Nominal output power: 960 W
  • Switching frequency: 5 kHz
  • PowerBoost: 120 ADC (4 s); 100 ADC (8 s)
  • TopBoost: 200 ADC (50 ms)
  • Signaling: 1 x IN1 LED (green); 1 x IN2 LED (green); 1 x DC OK signal contact (IN1 and IN2 > 10 VDC)
  • Operation status indicator: 2 x Green LED (Uo > 10 VDC)
  • Power loss Pl: ≤ 1.5 W; ≤ 9.5 W (nominal load)
  • Efficiency (typ.): 99.5 %
  • Internal fuse: No
  • Isolation voltage (connectors – housing): 0.5 kVDC
  • Protection class: III
  • protection rating: IP20; per EN 60529
  • Reverse voltage protection: Yes
  • Resistance to reverse feed: ≤ 37 VDC
  • Pollution degree: 2
  • Parallel operation: Yes
  • Series operation: No
  • MTBF: > 500,000 h (per IEC 61709)
  • Connection 1 — Connection type: Input/output
  • Connection 1 — Connection technology: Push-in CAGE CLAMP®
  • Connection 1 — WAGO connector: WAGO 831 Series
  • Connection 1 — Solid conductor: 0.5 … 10 mm² / 20 … 8 AWG
  • Connection 1 — Fine-stranded conductor: 0.5 … 10 mm² / 20 … 8 AWG
  • Connection 1 — Strip length: 13 … 15 mm / 0.51 … 0.59 inches
  • Connection 2 — Connection type: Signaling
  • Connection 2 — Connection technology: CAGE CLAMP®
  • Connection 2 — WAGO connector: WAGO 721 Series
  • Connection 2 — Solid conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Connection 2 — Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Connection 2 — Strip length: 8 … 9 mm / 0.31 … 0.35 inches
  • Width: 42 mm / 1.654 inches
  • Height: 127 mm / 5 inches
  • Depth from upper-edge of DIN-rail: 139.5 mm / 5.421 inches
  • Mounting type: DIN-35 rail
  • Weight: 450 g
  • Ambient temperature (operation): -40 … +70 °C
  • Ambient temperature (storage): -40 … +85 °C
  • Relative humidity: 5 … 96 % (no condensation permissible)
  • Derating: -1.5 %/K (> 65 °C)
  • Climatic category: 3K3 (per EN 60721; except for low air pressure)
  • Conformity marking: CE
  • Standards/specifications: EN 61010-1; EN 61010-2-201; EN 61000-6-2; EN 61000-6-3; UL 60950; UL 508; DNV; EN 61140

Image shown is representative. Refer to the product specifications for the exact configuration.