Description
The WAGO 770-114 plug features with strain relief housing, 4-pole, Cod. A, 4,00 mm², black.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60664-1
- IEC Approvals — Rated voltage (III / 3): 400 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 6 kV
- IEC Approvals — Rated current: 25 A
- IEC Approvals — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
- Ratings per UL 1977 — Note for the US market: Some versions may also be used for current interruption in accordance with the UL certificate in select applications with currents below 16 A and voltages up to 600 V. For further information, please contact your local sales office.
- Ratings per UL 1977 — Rated voltage (UL 1977): 600 V
- Ratings per UL 1977 — Rated current UL 1977: 23 A
- Connection Data — Clamping units: 8
- Connection Data — Total number of potentials: 4
- Connection Data — PE function: Preceding PE contact
- Connection 1 — Connection technology: Push-in CAGE CLAMP®
- Connection 1 — Actuation Method: Operating tool; Push-in
- Connection 1 — Nominal cross-section: 4 mm² / 12 AWG
- Connection 1 — Solid conductor: 0.5 … 4 mm² / 20 … 12 AWG
- Connection 1 — Solid conductor; push-in termination: 1.5 … 4 mm² / 16 … 12 AWG
- Connection 1 — Stranded conductor: 0.5 … 2.5 mm² / 20 … 14 AWG
- Connection 1 — Fine-stranded conductor: 0.5 … 4 mm² / 20 … 12 AWG
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.25 … 1.5 mm² / 20 … 16 AWG
- Connection 1 — Fine-stranded conductor; with uninsulated ferrule: 0.25 … 2.5 mm² / 20 … 14 AWG
- Connection 1 — Fine-stranded conductor; with ferrule; push-in termination: 1.5 mm² / 16 AWG
- Connection 1 — Strip length: 9 mm / 0.35 inches
- Connection 1 — Number of poles: 4
- Connection 1 — Connectable sheathed cable diameter: 9 … 13 mm
- Connection 1 — Conductor entry direction to mating direction: 0 °
- Connection 1 — Strip length (outer insulation): 55 mm
- Connection 1 — Coding: A
- Pin spacing: 10 mm / 0.394 inches
- Width: 44.6 mm / 1.756 inches
- Height: 17 mm / 0.669 inches
- Depth: 76 mm / 2.992 inches
- Use: General mains applications
- Marking: 1/L' 2/L ⏚ N
- Potential Marking: 1/L' 2/L ⏚ N
- Mating force of a plug-in connection: approx. 20 … 70 N (depending on pole number)
- Retention force of a plug-in connection: Locked: > 80 N
- Unmating force of a plug-in connection: Unlocked: approx. 20 … 70 N (depending on pole number)
- Number of mating cycles: 200, without resistive load
- protection rating: IP20; When mated and secured with a strain relief housing: IP2xC (These compact connectors are not designed for use in open, easily accessible areas!)
- Screw tightening torque: 0.5 Nm
- Contact type (pluggable connector): Male connector/plug
- Connector (connection type): for conductor
- Mismating protection: Yes
- Locking lever: Can be retrofitted
- Locking of plug-in connection: Locking lever
- Strain relief: Strain relief housing
- Color: black
- Cover color: gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Contact material: Copper or copper alloy; surface-treated
- Connector color: black
- Strain relief color: black
- Weight: 25.3 g
- Processing temperature: -5 … +40 °C
- Continuous operating temperature: -35 … +85 °C
- Note on continuous operating temperature: Insulating parts for temperatures ≤ 105 °C
Installation: Supply with WAGO installation instructions and follow the manufacturer’s technical ratings and installation requirements.
Image shown is representative. Refer to the product specifications for the exact configuration.