Description
The WAGO 769-231 1-conductor/1-pin carrier terminal block features with shield contact, for DIN-rail 35 x 15 and 35 x 7.5, 4 mm², CAGE CLAMP®, 4,00 mm², gray.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60947-7-1
- IEC Approvals — Rated voltage (III / 3): 250 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 4 kV
- IEC Approvals — Rated current: 32 A
- IEC Approvals — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
- Power loss, per pole (potential): 1.024 W
- Rated current IN for power loss specification: 32 A
- Resistance value for specified, current-dependent power loss: 0.001 Ω
- General information — Wiring direction: Front-entry wiring
- Connection Data — Clamping units: 1
- Connection Data — Total number of potentials: 1
- Connection Data — Number of levels: 1
- Connection 1 — Connection technology: CAGE CLAMP®
- Connection 1 — Total number of connection points: 1
- Connection 1 — Actuation Method: Operating tool
- Connection 1 — Connectable conductor materials: Copper
- Connection 1 — Nominal cross-section: 4 mm² / 12 AWG
- Connection 1 — Solid conductor: 0.08 … 4 mm² / 28 … 12 AWG
- Connection 1 — Fine-stranded conductor: 0.08 … 4 mm² / 28 … 12 AWG
- Connection 1 — Strip length: 8 … 9 mm / 0.31 … 0.35 inches
- Connection 1 — Wiring direction: Front-entry wiring
- Connection 2 — Number of connection points: 1
- Width: 5 mm / 0.197 inches
- Height: 71.5 mm / 2.815 inches
- Depth from upper-edge of DIN-rail: 28.5 mm / 1.122 inches
- Design: horizontal type
- Mounting type: DIN-35 rail
- Marking level: Center marking
- Color: gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 7.5 g
- Processing temperature: -35 … +85 °C
- Continuous operating temperature: -60 … +105 °C
Image shown is representative. Refer to the product specifications for the exact configuration.