null

WAGO 750-492 2-channel analog input, 4 … 20 mA, Differential input

$551.10
SKU:
750-492
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 750-492 2-channel analog input features 4 … 20 mA, Differential input.

Specifications

  • Number of analog inputs: 2
  • Number of Channels: 2
  • Signal type: Current
  • Signal type (current): 4 … 20 mADC
  • Sensor connection: 2 x (2-wire)
  • Input filter: Low pass (1st order), fG = 5 kHz
  • Signal characteristics: Differential
  • Resolution [bit]: 13 Bit
  • Operating mode: Continuously sampling (default)
  • Input resistance (max.): 270 Ω
  • Data width: 2 x 16-bit data; 2 x 8-bit control/status (optional)
  • Protective device: Non-linear limiting
  • Admissible continuous overload: 30 V
  • Crosstalk attenuation: 80 dB
  • Monotonicity without error code: yes
  • Measurement error, reference temperature: 25 °C
  • Measurement error, deviation max (upper-range value) ≤±: 0.05 %
  • Measurement error over entire temperature range: ≤ 0.4 %
  • Temperature error max. (upper-range value) ≤±: 0.01 %/K
  • Sampling duration: 5 µs
  • Sampling delay (channel/channel): 1 µs
  • Sampling delay (module): 1 ms
  • Sampling repetition time: 1 ms
  • Measurement range overflow/underflow: Status byte and LED
  • Measured value acquisition: Time synchronous within the module
  • Value of the least significant bit (LSB): 2.4 µA
  • Conversion method: SAR (Successive Approximation Register)
  • Supply voltage (system): 5 VDC; via data contacts
  • Current consumption (system supply): 80 mA
  • Isolation: 500 V system/field or channel/channel
  • Indicators: LED (A, C) green: Function AI 1, AI 2; LED (B, D) red: Error AI 1, AI 2
  • Connection Data — Connection technology: inputs / outputs: 6 x CAGE CLAMP®
  • Connection Data — Connectable conductor materials: Copper
  • Connection Data — Connection type: Inputs/Outputs
  • Connection Data — Solid conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
  • Connection Data — Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
  • Connection Data — Strip length: 8 … 9 mm / 0.31 … 0.35 inches
  • Width: 12 mm / 0.472 inches
  • Height: 100 mm / 3.937 inches
  • Depth: 69.8 mm / 2.748 inches
  • Depth from upper-edge of DIN-rail: 62.6 mm / 2.465 inches
  • Mounting type: DIN-35 rail
  • Pluggable connector: fixed
  • Color: light gray
  • Housing material: Polycarbonate; polyamide 6.6
  • Weight: 51 g
  • Conformity marking: CE
  • Ambient temperature (operation): 0 … +55 °C
  • Ambient temperature (storage): -40 … +85 °C
  • Protection type: IP20
  • Pollution degree: 2 per IEC 61131-2
  • Operating altitude: 0 … 2000 m / 0 … 6562 ft
  • Mounting position: Horizontal left, horizontal right, horizontal top, horizontal bottom, vertical top and vertical bottom
  • Relative humidity (without condensation): 95 %
  • Vibration resistance: Per IEC 60068-2-6
  • Shock resistance: 15g per IEC 60068-2-27
  • EMC immunity to interference: per EN 61000-6-2
  • EMC emission of interference: per EN 61000-6-4
  • Exposure to pollutants: Per IEC 60068-2-42 and IEC 60068-2-43
  • Permissible pollutant concentration H2S at a relative humidity < 75%: 10 ppm
  • Permissible pollutant concentration SO 2 at a relative humidity < 75%: 25 ppm

Image shown is representative. Refer to the product specifications for the exact configuration.