Description
The WAGO 750-486 4-channel analog input features 0/4 … 20 mA, Single-ended, NAMUR NE 43, Intrinsically safe.
Specifications
- Item description: 4-Channel Analog Input; 0/4 … 20 mA; NAMUR NE43
- Number of analog inputs: 4
- Number of Channels: 4
- Signal type: Current
- Signal type (current): 0 … 20 mADC; 4 … 20 mADC; 3.6 … 21 mADC
- Sensor connection: 2 x (3-wire)
- Signal characteristics: Single-ended
- Sensor supply: 15 V DC
- Resolution [bit]: 12 Bit
- Conversion time (typ. ≤): 10 ms
- Measurement error, reference temperature: 25 °C
- Measurement error, deviation max (upper-range value) ≤±: ±0.1 %
- Temperature error max. (upper-range value) ≤±: ±0.01 %/K
- Input resistance (max.): 200 Ω
- Intrinsically safe Ex i: Yes
- Data width: 4 x 16-bit data; 4 x 8-bit control/status (optional)
- Supply voltage (system): 5 VDC; via data contacts
- Current consumption (system supply): 45 mA
- Supply voltage (field): 24 VDC; (Ex i power supply: Uo = max. 26.8 V); via power jumper contacts (supply via blade contact; distribution via spring contact)
- Current consumption, field supply (module with no external load): 19 mA
- Power consumption Pmax.: 2.7 W (at 4 x 21 mA signal current)
- Power loss Pl: 1.5 W (at 4 x 21 mA signal current)
- Isolation: UM = 375 V system/supply
- Number of incoming power jumper contacts: 2
- Number of outgoing power jumper contacts: 2
- Current carrying capacity (power jumper contacts): 1 A
- Indicators: LED (A, E, C, G) green: Function AI 1 … AI 4; LED (B, F, D, H) red: Error AI 1 … AI 4
- Identification: ATEX: II 3 (1) G Ex ec [ia Ga] IIC T4 Gc; II (1) D [Ex ia Da] IIIC; I (M1) [Ex ia Ma] I; IECEx/INMETRO: Ex ec [ia Ga] IIC T4 Gc; [Ex ia Da] IIIC; [Ex ia Ma] I
- Ex standard: EN IEC 60079-0, -7, -11
- Safety-relevant data (circuit): Uo = 26.8 V; Io = 96.6 mA; Po = 615 mW; linear characteristic
- Reactances Ex ia IIC: Lo = 3.81 mH; Co = 92 nF
- Reactances Ex ia IIB: Lo = 15.24 mH; Co = 720 nF
- Reactances Ex ia IIA: Lo = 30.48 mH; Co = 2.37 μF
- Reactances Ex ia I: Lo = 50 mH; Co = 4.2 µF
- Reactances (note): Reactances without accounting for the concurrence of capacitance (Co) and inductance (Lo)
- Connection Data — Connection technology: inputs / outputs: 16 x CAGE CLAMP®
- Connection Data — Connectable conductor materials: Copper
- Connection Data — Connection type: Inputs/outputs
- Connection Data — Solid conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
- Connection Data — Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
- Connection Data — Strip length: 8 … 9 mm / 0.31 … 0.35 inches
- Width: 24 mm / 0.945 inches
- Height: 100 mm / 3.937 inches
- Depth: 67.8 mm / 2.669 inches
- Depth from upper-edge of DIN-rail: 60.6 mm / 2.386 inches
- Mounting type: DIN-35 rail
- Color: blue
- Housing material: Polycarbonate; polyamide 6.6
- Weight: 116 g
- Conformity marking: CE
- Ambient temperature (operation): 0 … +55 °C
- Ambient temperature (storage): -25 … +85 °C
- Protection type: IP20
- Pollution degree: 2 per IEC 61131-2
- Operating altitude: 0 … 2000 m / 0 … 6562 ft
- Mounting position: Horizontal left, horizontal right, horizontal top, horizontal bottom, vertical top and vertical bottom
- Relative humidity (without condensation): 95 %
- Vibration resistance: Per IEC 60068-2-6
- Shock resistance: 15g per IEC 60068-2-27
- EMC immunity to interference: per EN 61000-6-2, marine applications
- EMC emission of interference: per EN 61000-6-3, marine applications
- Exposure to pollutants: per IEC 60068-2-42 and IEC 60068-2-43
- Permissible pollutant concentration H2S at a relative humidity < 75%: 10 ppm
- Permissible pollutant concentration SO 2 at a relative humidity < 75%: 25 ppm
Image shown is representative. Refer to the product specifications for the exact configuration.