Description
The WAGO 750-435 1-channel digital input features NAMUR, Intrinsically safe.
Specifications
- Item description: 1-Channel Digital Input; NAMUR
- Number of digital inputs: 1
- Number of Channels: 1
- Signal type: NAMUR
- Signal current (0) NAMUR: ≤1.2 mA
- Signal current (1) NAMUR: ≥2.1 mA
- Sensor connection: 1 x (2-wire)
- Input characteristic: high-side switching
- Input filter: 3 ms
- Sensor supply: 8.2 VDC
- Input pulse separation: ≥3 ms
- Protection against incorrect wiring: Short circuit monitoring: > 6.4 mA; Wire break monitoring: < 0.2 mA
- Open-circuit voltage: 8.2 V
- Short-circuit current: ≤ 8.2 mA
- Switching hysteresis: 0.2 mA
- Input resistance: 1,000 Ω
- Intrinsically safe Ex i: Yes
- Diagnostics: Short circuit, wire break
- Input data width (internal) max.: 2 Bit
- Supply voltage (system): 5 VDC; via data contacts
- Current consumption (system supply): 2.5 mA
- Supply voltage (field): 24 VDC; (Ex i power supply: Uo = max. 26.8 V); via power jumper contacts (supply via blade contact; distribution via spring contact)
- Current consumption, field supply (module with no external load): 13 mA
- Power consumption Pmax.: 0.5 W
- Power loss Pl: 0.37 W
- Isolation: 300 VAC system/supply
- Number of incoming power jumper contacts: 2
- Number of outgoing power jumper contacts: 2
- Current carrying capacity (power jumper contacts): 1 A
- Indicators: LED (A) green: Status DI; LED (B) red: Error DI
- Identification: ATEX: II 3 (1) G Ex ec [ia Ga] IIC T4 Gc; II (1) D [Ex ia Da] IIIC; I (M1) [Ex ia Ma] I; IECEx/INMETRO: Ex ec [ia Ga] IIC T4 Gc; [Ex ia Da] IIIC; [Ex ia Ma] I; cULus (Zone classified): Cl I Zn 2 AEx nA [ia Ga] IIC T4 Gc; Cl I Zn 2 AEx nA [ia IIIC] IIC T4 Gc; Ex nA [ia Ga] IIC T4 Gc X; Ex nA [ia IIIC] IIC T4 Gc X; cULus (Devision classified): Class I, Div. 2, Group A B C D, T4
- Ex standard: EN IEC 60079-0, -7, -11
- Safety-relevant data (circuit): Uo = 12 V; Io = 16 mA; Po = 48 mW; linear characteristic
- Reactances Ex ia IIC: Lo = 180 mH; Co = 1.4 µF
- Reactances Ex ia IIB: Lo = 560 mH; Co = 9 µF
- Reactances Ex ia IIA: Lo = 0.9 H; Co = 36 μF
- Reactances Ex ia I: Lo = 1 H; Co = 38 µF
- Reactances (note): Reactances without accounting for the concurrence of capacitance (Co) and inductance (Lo)
- Connection Data — Connection technology: inputs / outputs: 2 x CAGE CLAMP®
- Connection Data — Connectable conductor materials: Copper
- Connection Data — Connection type: Inputs/outputs
- Connection Data — Solid conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
- Connection Data — Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
- Connection Data — Strip length: 8 … 9 mm / 0.31 … 0.35 inches
- Width: 12 mm / 0.472 inches
- Height: 100 mm / 3.937 inches
- Depth: 67.8 mm / 2.669 inches
- Depth from upper-edge of DIN-rail: 60.6 mm / 2.386 inches
- Mounting type: DIN-35 rail
- Color: blue
- Housing material: Polycarbonate; polyamide 6.6
- Weight: 46 g
- Conformity marking: CE
- Ambient temperature (operation): 0 … +55 °C
- Ambient temperature (storage): -25 … +85 °C
- Protection type: IP20
- Pollution degree: 2 per IEC 61131-2
- Operating altitude: 0 … 2000 m / 0 … 6562 ft
- Mounting position: Horizontal left, horizontal right, horizontal top, horizontal bottom, vertical top and vertical bottom
- Relative humidity (without condensation): 95 %
- Vibration resistance: 4g per IEC 60068-2-6
- Shock resistance: 15g per IEC 60068-2-27
- EMC immunity to interference: per EN 61000-6-2, marine applications
- EMC emission of interference: per EN 61000-6-3, marine applications
- Exposure to pollutants: per IEC 60068-2-42 and IEC 60068-2-43
- Permissible pollutant concentration H2S at a relative humidity < 75%: 10 ppm
- Permissible pollutant concentration SO 2 at a relative humidity < 75%: 25 ppm
Image shown is representative. Refer to the product specifications for the exact configuration.