Description
The WAGO 750-332 bACnet/IP Fieldbus Coupler features 4th generation.
Specifications
- Communications: BACnet/IP; Modbus (TCP, UDP)
- Device-specific: BACnet device profile: B-BC (BACnet building controller); BACnet revision: 12
- Transmission rate: 10/100 Mbit/s
- Transmission medium (communication/fieldbus): Twisted pair S-UTP; 100 Ω; Cat. 5; 100 m maximum cable length
- Transmission performance: Class D per EN 50173
- Type of memory card: SD and SDHC up to 32 GB (all guaranteed properties only valid with WAGO's memory card)
- Memory Card Slot: Push-push mechanism; cover lid (sealable)
- Number of modules per node (max.): 250
- Number of modules without a bus extension (max.): 64
- Configuration options: WAGO-I/O-CHECK; BACnet Configurator; Web-Based Management
- Input and output process image (fieldbus) max.: 1020 words/1020 words
- Supply voltage (system): 24 VDC, SELV/PELV (-25 … +30 %); via wiring interface (CAGE CLAMP® connection); External fuse required: 2 A slow-blow
- Current consumption (system supply): 440 mA
- Total current (system supply): 1,700 mA
- Supply voltage (field): 24 VDC, SELV/PELV (-25 … +30 %); via power jumper contacts (supply via CAGE CLAMP® connection; distribution via spring contact); External fuse required: 10 A slow-blow
- Input current (typ.) at nominal load (24 V): 500 mA
- Power supply efficiency (typ.) at nominal load (24 V): 90 %
- Number of outgoing power jumper contacts: 3
- Current carrying capacity (power jumper contacts): 10 A
- Protection type: IP20
- Pollution degree: 2 per IEC 61131-2
- Isolation: 500 V system/field
- Connection Data — Connection technology: communication/fieldbus: BACnet/IP: 2 x RJ-45; Modbus (TCP, UDP): 2 x RJ-45
- Connection Data — Connection technology: field supply: 6 x CAGE CLAMP®
- Connection Data — Connection technology: system supply: 2 x CAGE CLAMP®
- Connection Data — Connectable conductor materials: Copper
- Connection Data — Connection type: System/field supply
- Connection Data — Solid conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
- Connection Data — Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 14 AWG
- Connection Data — Strip length: 8 … 9 mm / 0.31 … 0.35 inches
- Connection Data — Connection technology: device configuration: 1 x Male connector; 4-pole
- Width: 61.5 mm / 2.421 inches
- Height: 100 mm / 3.937 inches
- Depth: 71.9 mm / 2.831 inches
- Depth from upper-edge of DIN-rail: 64.7 mm / 2.547 inches
- Mounting type: DIN-35 rail
- Housing material: Polycarbonate; polyamide 6.6
- Weight: 152.6 g
- Conformity marking: CE
- Ambient temperature (operation): 0 … +55 °C
- Ambient temperature (storage): -25 … +85 °C
- Operating altitude: 0 … 2000 m / 0 … 6562 ft
- Mounting position: Horizontal left, horizontal right, horizontal top, horizontal bottom, vertical top and vertical bottom
- Relative humidity (without condensation): 95 %
- Vibration resistance: Per IEC 60068-2-6
- Shock resistance: 15g per IEC 60068-2-27
- EMC immunity to interference: per EN 61000-6-2
- EMC emission of interference: per EN 61000-6-3
- Exposure to pollutants: per IEC 60068-2-42 and IEC 60068-2-43
- Permissible pollutant concentration H2S at a relative humidity < 75%: 10 ppm
- Permissible pollutant concentration SO 2 at a relative humidity < 75%: 25 ppm
- Pre-contractual Information: Data-Act-750-Series-Coupler
Image shown is representative. Refer to the product specifications for the exact configuration.