null

WAGO 740-105 PCB terminal block, 2.5 mm², Pin spacing 5 mm, 5-pole, CAGE CLAMP®, gray

$3.76
SKU:
740-105
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 740-105 pCB terminal block features 2.5 mm², Pin spacing 5 mm, 5-pole, CAGE CLAMP®, gray.

Specifications

  • IEC Approvals — Ratings per: IEC/EN 60664-1
  • IEC Approvals — Rated voltage (III / 3): 300 V
  • IEC Approvals — Rated impulse withstand voltage (III / 3): 4 kV
  • IEC Approvals — Rated voltage (III/2): 320 V
  • IEC Approvals — Rated impulse withstand voltage (III/2): 4 kV
  • IEC Approvals — Nominal voltage (II/2): 630 V
  • IEC Approvals — Rated impulse withstand voltage (II/2): 4 kV
  • IEC Approvals — Rated current: 16 A
  • IEC Approvals — Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
  • UL Approvals — Approvals per: UL 1059
  • UL Approvals — Rated voltage UL (Use Group B): 300 V
  • UL Approvals — Rated current UL (Use Group B): 10 A
  • UL Approvals — Rated voltage UL (Use Group D): 300 V
  • UL Approvals — Rated current UL (Use Group D): 10 A
  • Approvals per: CSA
  • Rated voltage CSA (Use Group B): 300 V
  • Rated current CSA (Use Group B): 16 A
  • Rated voltage CSA (Use Group D): 300 V
  • Rated current CSA (Use Group D): 10 A
  • Connection Data — Clamping units: 5
  • Connection Data — Total number of potentials: 5
  • Connection Data — Number of connection types: 1
  • Connection Data — Number of levels: 1
  • Connection 1 — Connection technology: CAGE CLAMP®
  • Connection 1 — Actuation Method: Operating tool
  • Connection 1 — Solid conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Connection 1 — Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.25 … 1.5 mm²
  • Connection 1 — Fine-stranded conductor; with uninsulated ferrule: 0.25 … 1.5 mm²
  • Connection 1 — Note (conductor cross-section): 12 AWG: THHN, THWN
  • Connection 1 — Strip length: 6 … 7 mm / 0.24 … 0.28 inches
  • Connection 1 — Conductor connection direction to PCB: 0 °
  • Connection 1 — Number of poles: 5
  • Pin spacing: 5 mm / 0.197 inches
  • Width: 25 mm / 0.984 inches
  • Height: 23.3 mm / 0.917 inches
  • Height from the surface: 18.2 mm / 0.717 inches
  • Depth: 11.1 mm / 0.437 inches
  • Solder pin length: 5.1 mm
  • Solder pin dimensions: 0.8 x 1 mm
  • Drilled hole diameter: 1.3 (+0.1) mm
  • PCB contact: THT
  • Solder pin arrangement: over the entire terminal strip (in-line)
  • Number of solder pins per potential: 1
  • Color: gray
  • Insulation material (main housing): Polyamide (PA66)
  • Flammability class per UL94: V0
  • Contact material: Electrolytic copper (ECu)
  • Weight: 6.9 g
  • Limit temperature range: -60 … +105 °C
  • Ambient temperature (installation): -35 … +60 °C

Image shown is representative. Refer to the product specifications for the exact configuration.