Description
The WAGO 734-202 1-conductor female connector features CAGE CLAMP®, 1.5 mm², Pin spacing 3.81 mm, 2-pole, 100% protected against mismating, orange.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60664-1
- IEC Approvals — Rated voltage (III / 3): 160 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 2.5 kV
- IEC Approvals — Rated voltage (III/2): 160 V
- IEC Approvals — Rated impulse withstand voltage (III/2): 2.5 kV
- IEC Approvals — Nominal voltage (II/2): 320 V
- IEC Approvals — Rated impulse withstand voltage (II/2): 2.5 kV
- IEC Approvals — Rated current: 10 A
- IEC Approvals — Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
- UL Approvals — Approvals per: UL 1059
- UL Approvals — Rated voltage UL (Use Group B): 300 V
- UL Approvals — Rated current UL (Use Group B): 10 A
- UL Approvals — Rated voltage UL (Use Group D): 300 V
- UL Approvals — Rated current UL (Use Group D): 10 A
- Approvals per: CSA
- Rated voltage CSA (Use Group B): 300 V
- Rated current CSA (Use Group B): 10 A
- Rated voltage CSA (Use Group D): 300 V
- Rated current CSA (Use Group D): 10 A
- Connection Data — Clamping units: 2
- Connection Data — Total number of potentials: 2
- Connection Data — Number of connection types: 1
- Connection Data — Number of levels: 1
- Connection 1 — Connection technology: CAGE CLAMP®
- Connection 1 — Actuation Method: Operating tool
- Connection 1 — Actuation direction 1: Operation parallel to conductor entry
- Connection 1 — Actuation direction 2: Operation perpendicular to conductor entry
- Connection 1 — Solid conductor: 0.08 … 1.5 mm² / 28 … 14 AWG
- Connection 1 — Fine-stranded conductor: 0.08 … 1.5 mm² / 28 … 14 AWG
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.25 … 1.5 mm²
- Connection 1 — Fine-stranded conductor; with uninsulated ferrule: 0.25 … 1.5 mm²
- Connection 1 — Note (conductor cross-section): Terminating 1.5 mm² conductors is possible; however insulation diameter does not allow clamping units to be terminated in a row.
- Connection 1 — Strip length: 6 … 7 mm / 0.24 … 0.28 inches
- Connection 1 — Number of poles: 2
- Connection 1 — Conductor entry direction to mating direction: 0 °
- Pin spacing: 3.81 mm / 0.15 inches
- Width: 9.82 mm / 0.387 inches
- Height: 13.4 mm / 0.528 inches
- Depth: 18.6 mm / 0.732 inches
- Anti-rotation protection: Yes
- Contact type (pluggable connector): Female connector/socket
- Connector (connection type): for conductor
- Mismating protection: Yes
- Plugging without loss of pin spacing: No
- Locking of plug-in connection: none
- Color: orange
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Contact material: Copper alloy
- Weight: 1.8 g
- Limit temperature range: -60 … +100 °C
- Ambient temperature (installation): -35 … +60 °C
- Processing temperature: -35 … +60 °C
- Test specification: ; Railway applications –; Rolling stock –; Electronic equipment: DIN EN 50155 (VDE 0115-200):2022-06
- Test procedure: ; Railway applications – ; Rolling stock equipment – ; Vibration and shock tests: DIN EN 61373 (VDE 0115-0106):2011-04
- Spectrum/Mounting location: Service life test, Category 1, Class A/B
- Functional test with noise-like oscillations: Test passed according to Section 8 of the standard
- Frequency: f1 = 5 Hz to f2 = 150 Hz
- Acceleration: 0.101g (highest test level used for all axes)
- Test duration per axis: 10 min.
- Test directions: X, Y and Z axes
- Monitoring of contact faults and interruptions: Passed
- Voltage drop measurement before and after each axis: Passed
- Simulated service life test through increased levels of noise-like oscillations: Test passed according to Section 9 of the standard
- Acceleration: 0.572g (highest test level used for all axes)
- Test duration per axis: 5 h
- Extended testing: Monitoring of contact faults and interruptions: Passed
- Extended testing: Voltage drop measurement before and after each axis: Passed
- Shock test: Test passed according to Section 10 of the standard
- Shock pulse form: Half sine
- Acceleration: 5g (highest test level used for all axes)
- Shock duration: 30 ms
- Number of shocks (per axis): 3 pos. und 3 neg.
- Vibration and shock stress for rolling stock equipment: Passed
Image shown is representative. Refer to the product specifications for the exact configuration.