Description
The WAGO 734-162 tHT male header features 1.0 x 1.0 mm solder pin, angled, 100% protected against mismating, Pin spacing 3.5 mm, 2-pole, light gray.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60664-1
- IEC Approvals — Rated voltage (III / 3): 160 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 2.5 kV
- IEC Approvals — Rated voltage (III/2): 160 V
- IEC Approvals — Rated impulse withstand voltage (III/2): 2.5 kV
- IEC Approvals — Nominal voltage (II/2): 320 V
- IEC Approvals — Rated impulse withstand voltage (II/2): 2.5 kV
- IEC Approvals — Rated current: 10 A
- IEC Approvals — Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
- UL Approvals — Approvals per: UL 1059
- UL Approvals — Rated voltage UL (Use Group B): 300 V
- UL Approvals — Rated current UL (Use Group B): 10 A
- UL Approvals — Rated voltage UL (Use Group D): 300 V
- UL Approvals — Rated current UL (Use Group D): 10 A
- Approvals per: CSA
- Rated voltage CSA (Use Group B): 300 V
- Rated current CSA (Use Group B): 10 A
- Rated voltage CSA (Use Group D): 300 V
- Rated current CSA (Use Group D): 10 A
- Connection Data — Total number of potentials: 2
- Connection Data — Number of connection types: 1
- Connection Data — Number of levels: 1
- Connection 1 — Number of poles: 2
- Pin spacing: 3.5 mm / 0.138 inches
- Width: 9.4 mm / 0.37 inches
- Height: 12.3 mm / 0.484 inches
- Height from the surface: 8.5 mm / 0.335 inches
- Depth: 10.3 mm / 0.406 inches
- Solder pin length: 3.8 mm
- Solder pin dimensions: 1 x 1 mm
- Drilled hole diameter: 1.4 (+0.1) mm
- Anti-rotation protection: Yes
- Contact type (pluggable connector): Male connector/plug
- Connector (connection type): for PCB
- Mismating protection: Yes
- Plugging without loss of pin spacing: No
- Mating direction to the PCB: 0 °
- Locking of plug-in connection: none
- PCB contact: THT
- Solder pin arrangement: over the entire male connector (in-line)
- Number of solder pins per potential: 1
- Color: light gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Contact material: Electrolytic copper (ECu)
- Weight: 0.6 g
- Limit temperature range: -60 … +100 °C
- Ambient temperature (installation): -35 … +60 °C
- Processing temperature: -35 … +60 °C
Image shown is representative. Refer to the product specifications for the exact configuration.