Description
The WAGO 734-138 tHT male header features 1.0 x 1.0 mm solder pin, straight, 100% protected against mismating, Pin spacing 3.5 mm, 8-pole, light gray.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60664-1
- IEC Approvals — Rated voltage (III / 3): 160 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 2.5 kV
- IEC Approvals — Rated voltage (III/2): 160 V
- IEC Approvals — Rated impulse withstand voltage (III/2): 2.5 kV
- IEC Approvals — Nominal voltage (II/2): 320 V
- IEC Approvals — Rated impulse withstand voltage (II/2): 2.5 kV
- IEC Approvals — Rated current: 10 A
- IEC Approvals — Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
- UL Approvals — Approvals per: UL 1059
- UL Approvals — Rated voltage UL (Use Group B): 300 V
- UL Approvals — Rated current UL (Use Group B): 10 A
- UL Approvals — Rated voltage UL (Use Group D): 300 V
- UL Approvals — Rated current UL (Use Group D): 10 A
- Approvals per: CSA
- Rated voltage CSA (Use Group B): 300 V
- Rated current CSA (Use Group B): 10 A
- Rated voltage CSA (Use Group D): 300 V
- Rated current CSA (Use Group D): 10 A
- Connection Data — Total number of potentials: 8
- Connection Data — Number of connection types: 1
- Connection Data — Number of levels: 1
- Connection 1 — Number of poles: 8
- Pin spacing: 3.5 mm / 0.138 inches
- Width: 30.4 mm / 1.197 inches
- Height: 14.8 mm / 0.583 inches
- Height from the surface: 10.3 mm / 0.406 inches
- Depth: 8.5 mm / 0.335 inches
- Solder pin length: 4.5 mm
- Solder pin dimensions: 1 x 1 mm
- Drilled hole diameter: 1.4 (+0.1) mm
- Anti-rotation protection: Yes
- Contact type (pluggable connector): Male connector/plug
- Connector (connection type): for PCB
- Mismating protection: Yes
- Plugging without loss of pin spacing: No
- Mating direction to the PCB: 90 °
- Locking of plug-in connection: none
- PCB contact: THT
- Solder pin arrangement: over the entire male connector (in-line)
- Number of solder pins per potential: 1
- Color: light gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Contact material: Electrolytic copper (ECu)
- Weight: 1.9 g
- Limit temperature range: -60 … +100 °C
- Ambient temperature (installation): -35 … +60 °C
- Processing temperature: -35 … +60 °C
- Test specification: ; Railway applications –; Rolling stock –; Electronic equipment: DIN EN 50155 (VDE 0115-200):2022-06
- Test procedure: ; Railway applications – ; Rolling stock equipment – ; Vibration and shock tests: DIN EN 61373 (VDE 0115-0106):2011-04
- Spectrum/Mounting location: Service life test, Category 1, Class A/B
- Functional test with noise-like oscillations: Test passed according to Section 8 of the standard
- Frequency: f1 = 5 Hz to f2 = 150 Hz
- Acceleration: 0.101g (highest test level used for all axes)
- Test duration per axis: 10 min.
- Test directions: X, Y and Z axes
- Monitoring of contact faults and interruptions: Passed
- Voltage drop measurement before and after each axis: Passed
- Simulated service life test through increased levels of noise-like oscillations: Test passed according to Section 9 of the standard
- Acceleration: 0.572g (highest test level used for all axes)
- Test duration per axis: 5 h
- Extended testing: Monitoring of contact faults and interruptions: Passed
- Extended testing: Voltage drop measurement before and after each axis: Passed
- Shock test: Test passed according to Section 10 of the standard
- Shock pulse form: Half sine
- Acceleration: 5g (highest test level used for all axes)
- Shock duration: 30 ms
- Number of shocks (per axis): 3 pos. und 3 neg.
- Vibration and shock stress for rolling stock equipment: Passed
Image shown is representative. Refer to the product specifications for the exact configuration.