Description
The WAGO 726-721 matrix patchboard features 80-pole, Marking 1-80, Colors of modules: gray/white, Module marking, side 1 and 2 vertical, gray/white/dark gray.
Specifications
- IEC Approvals — Rated voltage (III / 3): 500 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 6 kV
- IEC Approvals — Rated current: 10 A
- IEC Approvals — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
- General information — Wiring direction: Front-entry wiring
- Connection 1 — Connection type: Page 1
- Connection 1 — Connection technology: CAGE CLAMP®
- Connection 1 — Total number of connection points: 3
- Connection 1 — Actuation Method: Operating tool
- Connection 1 — Connectable conductor materials: Copper
- Connection 1 — Solid conductor: 0.08 … 1.5 mm² / 28 … 16 AWG
- Connection 1 — Fine-stranded conductor: 0.08 … 1.5 mm² / 28 … 16 AWG
- Connection 1 — Strip length: 8 … 10 mm / 0.31 … 0.39 inches
- Connection 1 — Number of poles: 80
- Connection 1 — Wiring direction: Front-entry wiring
- Connection 2 — Connection type: Side 2
- Connection 2 — Number of connection points: 3
- Connection 2 — Solid conductor: 0.08 … 1.5 mm² / 28 … 16 AWG
- Connection 2 — Fine-stranded conductor: 0.08 … 1.5 mm² / 28 … 16 AWG
- Width: 107.9 mm / 4.248 inches
- Height: 132 mm / 5.197 inches
- Depth: 36.5 mm / 1.437 inches
- Marking: 1 … 80
- Color: gray/white/dark gray
- Module color: white/gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 406.9 g
- Test specification: ; Railway applications –; Rolling stock –; Electronic equipment: DIN EN 50155 (VDE 0115-200):2022-06
- Test procedure: ; Railway applications – ; Rolling stock equipment – ; Vibration and shock tests: DIN EN 61373 (VDE 0115-0106):2011-04
- Spectrum/Mounting location: Service life test, Category 1, Class A/B
- Functional test with noise-like oscillations: Test passed according to Section 8 of the standard
- Frequency: f1 = 5 Hz to f2 = 150 Hz
- Acceleration: 0.101g (highest test level used for all axes)
- Test duration per axis: 10 min.
- Test directions: X, Y and Z axes
- Monitoring of contact faults and interruptions: Passed
- Voltage drop measurement before and after each axis: Passed
- Simulated service life test through increased levels of noise-like oscillations: Test passed according to Section 9 of the standard
- Acceleration: 0.572g (highest test level used for all axes)
- Test duration per axis: 5 h
- Extended testing: Monitoring of contact faults and interruptions: Passed
- Extended testing: Voltage drop measurement before and after each axis: Passed
- Shock test: Test passed according to Section 10 of the standard
- Shock pulse form: Half sine
- Acceleration: 5g (highest test level used for all axes)
- Shock duration: 30 ms
- Number of shocks (per axis): 3 pos. und 3 neg.
- Vibration and shock stress for rolling stock equipment: Passed
Image shown is representative. Refer to the product specifications for the exact configuration.