null

WAGO 722-838 THT female header, angled, Pin spacing 7.5 mm, 8-pole, 100% protected against mismating, 0.6 x 1.0 mm solder pin, light gray

$7.36
SKU:
722-838
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 722-838 tHT female header features angled, Pin spacing 7.5 mm, 8-pole, 100% protected against mismating, 0.6 x 1.0 mm solder pin, light gray.

Specifications

  • IEC Approvals — Ratings per: IEC/EN 60664-1
  • IEC Approvals — Rated voltage (III / 3): 500 V
  • IEC Approvals — Rated impulse withstand voltage (III / 3): 6 kV
  • IEC Approvals — Rated voltage (III/2): 630 V
  • IEC Approvals — Rated impulse withstand voltage (III/2): 6 kV
  • IEC Approvals — Nominal voltage (II/2): 1000 V
  • IEC Approvals — Rated impulse withstand voltage (II/2): 6 kV
  • IEC Approvals — Rated current: 12 A
  • IEC Approvals — Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
  • UL Approvals — Approvals per: UL 1059
  • UL Approvals — Rated voltage UL (Use Group B): 300 V
  • UL Approvals — Rated current UL (Use Group B): 15 A
  • UL Approvals — Rated voltage UL (Use Group D): 300 V
  • UL Approvals — Rated current UL (Use Group D): 10 A
  • Approvals per: CSA
  • Rated voltage CSA (Use Group B): 300 V
  • Rated current CSA (Use Group B): 15 A
  • Rated voltage CSA (Use Group D): 300 V
  • Rated current CSA (Use Group D): 10 A
  • Connection Data — Total number of potentials: 8
  • Connection Data — Number of connection types: 1
  • Connection Data — Number of levels: 1
  • Connection 1 — Number of poles: 8
  • Pin spacing: 7.5 mm / 0.295 inches
  • Width: 59 mm / 2.323 inches
  • Height: 16.6 mm / 0.654 inches
  • Height from the surface: 11.6 mm / 0.457 inches
  • Depth: 18.25 mm / 0.719 inches
  • Solder pin length: 5 mm
  • Solder pin dimensions: 0.6 x 1 mm
  • Drilled hole diameter: 1.3 (+0.1) mm
  • Anti-rotation protection: Yes
  • Contact type (pluggable connector): Female header
  • Connector (connection type): for PCB
  • Mismating protection: Yes
  • Plugging without loss of pin spacing: No
  • Mating direction to the PCB: 0 °
  • Locking of plug-in connection: none
  • PCB contact: THT
  • Solder pin arrangement: over the entire female connector (in-line)
  • Number of solder pins per potential: 1
  • Color: light gray
  • Insulation material (main housing): Polyamide (PA66)
  • Flammability class per UL94: V0
  • Contact material: Copper alloy
  • Weight: 8.8 g
  • Limit temperature range: -60 … +100 °C
  • Processing temperature: -35 … +60 °C
  • Test specification: ; Railway applications –; Rolling stock –; Electronic equipment: DIN EN 50155 (VDE 0115-200):2022-06
  • Test procedure: ; Railway applications – ; Rolling stock equipment – ; Vibration and shock tests: DIN EN 61373 (VDE 0115-0106):2011-04
  • Spectrum/Mounting location: Service life test, Category 1, Class A/B
  • Functional test with noise-like oscillations: Test passed according to Section 8 of the standard
  • Frequency: f1 = 5 Hz to f2 = 150 Hz
  • Acceleration: 0.101g (highest test level used for all axes)
  • Test duration per axis: 10 min.
  • Test directions: X, Y and Z axes
  • Monitoring of contact faults and interruptions: Passed
  • Voltage drop measurement before and after each axis: Passed
  • Simulated service life test through increased levels of noise-like oscillations: Test passed according to Section 9 of the standard
  • Acceleration: 0.572g (highest test level used for all axes)
  • Test duration per axis: 5 h
  • Extended testing: Monitoring of contact faults and interruptions: Passed
  • Extended testing: Voltage drop measurement before and after each axis: Passed
  • Shock test: Test passed according to Section 10 of the standard
  • Shock pulse form: Half sine
  • Acceleration: 5g (highest test level used for all axes)
  • Shock duration: 30 ms
  • Number of shocks (per axis): 3 pos. und 3 neg.
  • Vibration and shock stress for rolling stock equipment: Passed

Image shown is representative. Refer to the product specifications for the exact configuration.