Description
The WAGO 713-1410 tHT male header, 2-row features 0.8 x 0.8 mm solder pin, straight, 100% protected against mismating, Pin spacing 3.5 mm, 20-pole, black.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60664-1
- IEC Approvals — Rated voltage (III / 3): 80 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 2.5 kV
- IEC Approvals — Rated voltage (III/2): 160 V
- IEC Approvals — Rated impulse withstand voltage (III/2): 2.5 kV
- IEC Approvals — Nominal voltage (II/2): 250 V
- IEC Approvals — Rated impulse withstand voltage (II/2): 2.5 kV
- IEC Approvals — Rated current: 10 A
- IEC Approvals — Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
- UL Approvals — Approvals per: UL 1059
- UL Approvals — Rated voltage UL (Use Group B): 150 V
- UL Approvals — Rated current UL (Use Group B): 10 A
- UL Approvals — Rated voltage UL (Use Group C): 50 V
- UL Approvals — Rated current UL (Use Group C): 10 A
- Approvals per: CSA
- Rated voltage CSA (Use Group B): 150 V
- Rated current CSA (Use Group B): 12 A
- Connection Data — Total number of potentials: 20
- Connection Data — Number of connection types: 1
- Connection Data — Number of levels: 2
- Connection 1 — Number of poles: 20
- Pin spacing: 3.5 mm / 0.138 inches
- Width: 36.5 mm / 1.437 inches
- Height: 17.3 mm / 0.681 inches
- Height from the surface: 13.5 mm / 0.531 inches
- Depth: 13.3 mm / 0.524 inches
- Solder pin length: 3.8 mm
- Solder pin dimensions: 0.8 x 0.8 mm
- Drilled hole diameter: 1.2 (+0.1) mm
- Anti-rotation protection: Yes
- Contact type (pluggable connector): Male connector/plug
- Connector (connection type): for PCB
- Mismating protection: Yes
- Plugging without loss of pin spacing: No
- Mating direction to the PCB: 90 °
- Locking of plug-in connection: none
- PCB contact: THT
- Solder pin arrangement: over the entire male connector (in-line)
- Number of solder pins per potential: 1
- Color: black
- Insulation material (main housing): Polyphthalamide (PPA GF)
- Flammability class per UL94: V0
- Contact material: Electrolytic copper (ECu)
- Weight: 5.2 g
- Limit temperature range: -60 … +100 °C
- Ambient temperature (installation): -35 … +60 °C
- Processing temperature: -35 … +60 °C
Image shown is representative. Refer to the product specifications for the exact configuration.