null

WAGO 289-619 Interface module, Pluggable connector per DIN 41651, 64-pole, Triple-deck PCB terminal blocks, in mounting carrier, 2,50 mm²

$181.30
SKU:
289-619
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 289-619 interface module features Pluggable connector per DIN 41651, 64-pole, Triple-deck PCB terminal blocks, in mounting carrier, 2,50 mm².

Specifications

  • Operating voltage: ≤ 125 VAC/VDC
  • Nominal current: 1 A
  • Rated Voltage: 125 V
  • Pollution degree: 2
  • protection rating: IP00
  • Dielectric strength (channel/channel) (AC, 1 min.): 1.3 kVrms (500 Vrms per component specification)
  • Insulation type: Functional insulation
  • Connection Data — Performance level: 3 / 50 mating cycles
  • Connection 1 — Pluggable connector: Pluggable connector per DIN 41651; male connector
  • Connection 1 — Pole number 1: 64
  • Connection 1 — Connection type: System
  • Connection 1 — Note (conductor cross-section): 12 AWG: THHN, THWN
  • Connection 1 — Mating direction: vertical
  • Connection 2 — Design: PCB terminal blocks (triple-deck)
  • Connection 2 — Pole number: 64
  • Connection 2 — Connection type: Field
  • Connection 2 — Connection technology: CAGE CLAMP®
  • Connection 2 — WAGO connector: WAGO 737 Series
  • Connection 2 — Solid conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Connection 2 — Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
  • Connection 2 — Strip length: 5 … 6 mm / 0.2 … 0.24 inches
  • Width: 114 mm / 4.488 inches
  • Height: 85 mm / 3.346 inches
  • Depth from upper-edge of DIN-rail: 62 mm / 2.441 inches
  • Mounting type: DIN-35 rail
  • Housing design: Mounting carrier
  • Contact material (connector): Au over Ni
  • Weight: 170.3 g
  • Ambient temperature (operation): -20 … +55 °C
  • Ambient temperature (storage): -40 … +70 °C
  • Relative humidity: ≤ 85 % (non-condensing)
  • Standards/specifications: EN 61010-2-201

Image shown is representative. Refer to the product specifications for the exact configuration.