Description
The WAGO 289-577 interface module features with solder pin, Female connector, 25-pole, Mating connector with solder connection, Vertical mounting, PCB terminal blocks, double-row, in mounting carrier, with shield connection, 2,50 mm².
Specifications
- Operating voltage: ≤ 125 VAC/VDC
- Nominal current: 2 A
- Contact resistance (max.): 30 mΩ
- Specialty functions: with shield connection
- Rated Voltage: 125 V
- Rated impulse withstand voltage: 0.8 kV
- Pollution degree: 2
- protection rating: IP20
- Insulation type: Basic insulation
- Connection Data — Performance level: 2 / 200 mating cycles
- Connection Data — Strain relief: UNC 4-40 stud bolt
- Connection 1 — Pluggable connector: D-subminiature female connector
- Connection 1 — Pole number 1: 25
- Connection 1 — Connection type: System
- Connection 1 — Note (conductor cross-section): 12 AWG: THHN, THWN
- Connection 1 — Mating direction: vertical
- Connection 2 — Design: PCB terminal blocks (double-row)
- Connection 2 — Pole number: 26
- Connection 2 — Connection type: Field
- Connection 2 — Connection technology: CAGE CLAMP®
- Connection 2 — WAGO connector: WAGO 236 Series
- Connection 2 — Solid conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
- Connection 2 — Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
- Connection 2 — Strip length: 5 … 6 mm / 0.2 … 0.24 inches
- Width: 68.5 mm / 2.697 inches
- Height: 85 mm / 3.346 inches
- Depth from upper-edge of DIN-rail: 34 mm / 1.339 inches
- Mounting type: DIN-35 rail
- Housing design: Mounting carrier
- Contact material (connector): Au over Ni
- Weight: 81.8 g
- Ambient temperature (operation): -20 … +50 °C
- Ambient temperature (storage): -40 … +70 °C
- Relative humidity: ≤ 85 % (non-condensing)
- Standards/specifications: EN 61010-2-201
Image shown is representative. Refer to the product specifications for the exact configuration.