Description
The WAGO 289-523 interface module features Pluggable connector per DIN 41612, 64-pole, Mating connector for IDC, Horizontal mounting, PCB terminal blocks, double-row, in mounting carrier, Type C, 2,50 mm².
Specifications
- Operating voltage: ≤ 30 VAC; ≤ 50 VDC
- Nominal current: 1 A
- Contact resistance (max.): 20 mΩ
- Rated Voltage: 50 V
- Rated impulse withstand voltage: 0.8 kV
- Pollution degree: 2
- protection rating: IP00
- Connection Data — Performance level: 2 / 400 mating cycles
- Connection 1 — Pluggable connector: Pluggable connector per DIN 41612; Type C; male connector
- Connection 1 — Pole number 1: 64
- Connection 1 — Connection type: System
- Connection 1 — Note (conductor cross-section): 12 AWG: THHN, THWN
- Connection 1 — Mating direction: horizontal
- Connection 2 — Design: PCB terminal blocks (double-row)
- Connection 2 — Pole number: 64
- Connection 2 — Connection type: Field
- Connection 2 — Connection technology: CAGE CLAMP®
- Connection 2 — WAGO connector: WAGO 236 Series
- Connection 2 — Solid conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
- Connection 2 — Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
- Connection 2 — Strip length: 5 … 6 mm / 0.2 … 0.24 inches
- Width: 171 mm / 6.732 inches
- Height: 85 mm / 3.346 inches
- Depth from upper-edge of DIN-rail: 34 mm / 1.339 inches
- Mounting type: DIN-35 rail
- Housing design: Mounting carrier
- Contact material (connector): Copper alloy; gold plated
- Weight: 159.3 g
- Ambient temperature (operation): -20 … +50 °C
- Ambient temperature (storage): -40 … +70 °C
- Relative humidity: ≤ 85 % (non-condensing)
Image shown is representative. Refer to the product specifications for the exact configuration.