Description
The WAGO 286-791 optocoupler module features Nominal input voltage: 24 VDC, Output voltage range: 20 … 60 VDC, Limiting continuous current: 0.1 A, 2-wire connection, Frequency: 3 kHz, Red status indicator, Module width: 10 mm, gray.
Specifications
- Nominal input voltage UN: 24 VDC
- Input voltage range (high level): 15 … 30 VDC
- Nominal input current at UN: 14 mA
- Circuit type: 2-wire connection
- Limiting continuous current: 0.1 A
- Output voltage range: 20 … 60 VDC
- Voltage drop: ≤ 2 VDC
- Leakage current at rated voltage: ≤ 2 µA
- Turn-on time: ≤ 10 µs
- Turn-off time: ≤ 50 µs
- Switching frequency: ≤ 3 kHz
- Rated Voltage: 300 V
- Overvoltage category: II
- Pollution degree: 2
- Dielectric strength (control/load circuit) (AC, 1 min): 2.5 kVrms
- Insulation type (control/load circuit): Basic insulation
- protection rating: IP20
- Width: 10 mm / 0.394 inches
- Height: 52 mm / 2.047 inches
- Depth from upper-edge of DIN-rail: 82.5 mm / 3.25 inches
- Note (dimensions): Depth including carrier terminal block
- Mounting type: Pluggable module for receptacle terminal blocks
- Color: gray
- Weight: 15.3 g
- Ambient temperature (operation at UN): -25 … +40 °C
- Ambient temperature (storage): -25 … +40 °C
- Processing temperature: -25 … +50 °C
- Relative humidity: 5 … 95 % (no condensation permissible)
- Operating altitude (max.): 2000 m
- Standards/specifications: EN 61010-2-201; EN 61000-6-1; EN 61000-6-2; EN 61000-6-3
Image shown is representative. Refer to the product specifications for the exact configuration.