Description
The WAGO 286-721 optocoupler module features Nominal input voltage: 24 VDC, Output voltage range: 15 … 30 VDC, Limiting continuous current: 5 A, 3-wire connection/low-side switching, Red status indicator, Module width: 15 mm, gray.
Specifications
- Nominal input voltage UN: 24 VDC
- Input voltage range (high level): 15 … 30 VDC
- Nominal input current at UN: 14 mA
- Input current range: 7.5 … 18 mA
- Circuit type: 3-wire connection; Low-side switching
- Limiting continuous current: 5 A
- Nominal output voltage: 24 VDC
- Output voltage range: 15 … 40 VDC
- Voltage drop: ≤ 0.5 VDC
- Leakage current at rated voltage: ≤ 2 µA
- Turn-on time: ≤ 20 µs
- Turn-off time: ≤ 80 µs
- Switching frequency: ≤ 1 kHz
- Status indicator: Red LED
- Pollution degree: 2
- Dielectric strength (control/load circuit) (AC, 1 min): 2.5 kVrms
- protection rating: IP20
- Width: 15 mm / 0.591 inches
- Height: 52 mm / 2.047 inches
- Depth from upper-edge of DIN-rail: 82.5 mm / 3.25 inches
- Note (dimensions): Depth including carrier terminal block
- Mounting type: Pluggable module for receptacle terminal blocks
- Color: gray
- Weight: 29.2 g
- Ambient temperature (operation at UN): -25 … +40 °C
- Ambient temperature (storage): -25 … +40 °C
- Processing temperature: -25 … +50 °C
- Relative humidity: 5 … 95 % (no condensation permissible)
- Operating altitude (max.): 2000 m
- Standards/specifications: EN 60664-1
Image shown is representative. Refer to the product specifications for the exact configuration.