Description
The WAGO 285-601 pOWER CAGE CLAMP feedthrough terminal block features DIN 35 x 15 rail mount, 2-conductor, 2 AWG, 16 mm wide, gray.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60947-7-1
- IEC Approvals — Rated voltage (III / 3): 800 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 8 kV
- IEC Approvals — Rated current: 125 A
- IEC Approvals — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
- Power loss, per pole (potential): 4.062 W
- Rated current IN for power loss specification: 125 A
- Resistance value for specified, current-dependent power loss: 0 Ω
- General information — Wiring direction: Front-entry wiring
- Connection Data — Clamping units: 2
- Connection Data — Total number of potentials: 1
- Connection Data — Number of levels: 1
- Connection 1 — Connection technology: CAGE CLAMP®
- Connection 1 — Actuation Method: Operating tool
- Connection 1 — Connectable conductor materials: Copper
- Connection 1 — Nominal cross-section: 35 mm²
- Connection 1 — Solid conductor: 6 … 35 mm² / 8 … 2 AWG
- Connection 1 — Strip length: 23 mm / 0.91 inches
- Connection 1 — Wiring direction: Front-entry wiring
- Width: 16 mm / 0.63 inches
- Height: 115.5 mm / 4.547 inches
- Depth from upper-edge of DIN-rail: 52.5 mm / 2.067 inches
- Design: horizontal type
- Mounting type: DIN-rail mounting
- Assembly instructions: only suitable for DIN 35 x 15 rail
- Marking level: Side marking
- Color: gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 131 g
- Processing temperature: -35 … +85 °C
- Continuous operating temperature: -60 … +105 °C
Image shown is representative. Refer to the product specifications for the exact configuration.