Description
The WAGO 282-691 2-conductor through terminal block features 6 mm², suitable for Ex e II applications, lateral marker slots, for DIN-rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 6,00 mm², light gray.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60947-7-1
- Reference to hazardous areas: See application instructions in section “Knowledge and; Downloads – Documentation – Additional Information: Technical Section; Technical Explications”
- Rated voltage EN (Ex e II): 550 V
- Rated current (Ex e II): 39 A
- Power loss, per pole (potential): 1.186 W
- Rated current IN for power loss specification: 39 A
- Resistance value for specified, current-dependent power loss: 0.001 Ω
- General information — Wiring direction: Front-entry wiring
- Connection Data — Clamping units: 2
- Connection Data — Total number of potentials: 1
- Connection Data — Number of levels: 1
- Connection 1 — Connection technology: CAGE CLAMP®
- Connection 1 — Actuation Method: Operating tool
- Connection 1 — Connectable conductor materials: Copper
- Connection 1 — Solid conductor: 0.2 … 6 mm² / 24 … 10 AWG
- Connection 1 — Fine-stranded conductor: 0.2 … 6 mm² / 24 … 10 AWG
- Connection 1 — Strip length: 12 … 13 mm / 0.47 … 0.51 inches
- Connection 1 — Wiring direction: Front-entry wiring
- Width: 8 mm / 0.315 inches
- Height: 62 mm / 2.441 inches
- Depth from upper-edge of DIN-rail: 31.5 mm / 1.24 inches
- Design: horizontal type
- Mounting type: DIN-35 rail
- Marking level: Side marking
- Color: light gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 12.5 g
- Processing temperature: -35 … +85 °C
- Continuous operating temperature: -60 … +105 °C
Image shown is representative. Refer to the product specifications for the exact configuration.