Description
The WAGO 282-126 2-conductor fuse terminal block features without blown fuse indication, for DIN-rail 35 x 15 and 35 x 7.5, 6 mm², CAGE CLAMP®, gray.
Specifications
- IEC Approvals — Rated voltage (III / 3): 500 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 6 kV
- IEC Approvals — Rated current: 10 A
- IEC Approvals — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
- Power loss Ploss (max.) (note): When selecting glass cartridge fuses, make sure that the maximum power loss listed below is not exceeded. The power loss is determined according to IEC or EN 60947-7-3/VDE 0611-6 at 23°C. The temperature rise of the terminal block must be checked according to their application and mounting. Higher ambient temperatures represent an additional impact on miniature fuses. Therefore, in such applications, the rated current must be reduced if necessary. More details are available from the manufacturers.
- Maximum power loss Ploss of fuse insert for overload and short-circuit protection (individual arrangement): 2.5 W
- Maximum power loss Ploss of fuse insert for overload and short-circuit protection (block arrangement): 2.5 W
- Maximum power loss Ploss of fuse insert for short-circuit protection (individual arrangement): 4 W
- Power loss Ploss (max.) of fuse cartridge for short-circuit protection (block arrangement): 4 W
- General information — Fuse receptacle: screwed
- General information — Fuse type: Cylindrical fuse; 5 x 25 mm
- General information — Wiring direction: Side-entry wiring
- Connection Data — Clamping units: 2
- Connection Data — Total number of potentials: 2
- Connection Data — Number of levels: 1
- Connection 1 — Connection technology: CAGE CLAMP®
- Connection 1 — Actuation Method: Operating tool
- Connection 1 — Connectable conductor materials: Copper
- Connection 1 — Solid conductor: 0.2 … 6 mm² / 24 … 10 AWG
- Connection 1 — Fine-stranded conductor: 0.2 … 6 mm² / 24 … 10 AWG
- Connection 1 — Strip length: 12 … 13 mm / 0.47 … 0.51 inches
- Connection 1 — Wiring direction: Side-entry wiring
- Width: 13 mm / 0.512 inches
- Height: 62 mm / 2.441 inches
- Depth from upper-edge of DIN-rail: 54.5 mm / 2.146 inches
- Design: horizontal type
- Mounting type: DIN-35 rail
- Marking level: Side marking
- Color: gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 26.4 g
- Processing temperature: -35 … +85 °C
- Continuous operating temperature: -60 … +105 °C
Image shown is representative. Refer to the product specifications for the exact configuration.