null

WAGO 281-903 2-conductor through terminal block, 4 mm², center marking, for DIN-rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 4,00 mm², red

$2.96
SKU:
281-903
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 281-903 2-conductor through terminal block features 4 mm², center marking, for DIN-rail 35 x 15 and 35 x 7.5, CAGE CLAMP®, 4,00 mm², red.

Specifications

  • IEC Approvals — Ratings per: IEC/EN 60947-7-1
  • IEC Approvals — Rated voltage (III / 3): 800 V
  • IEC Approvals — Rated impulse withstand voltage (III / 3): 8 kV
  • IEC Approvals — Rated current: 32 A
  • IEC Approvals — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
  • Power loss, per pole (potential): 1.024 W
  • Rated current IN for power loss specification: 32 A
  • Resistance value for specified, current-dependent power loss: 0.001 Ω
  • General information — Wiring direction: Front-entry wiring
  • Connection Data — Clamping units: 2
  • Connection Data — Total number of potentials: 1
  • Connection Data — Number of levels: 1
  • Connection 1 — Connection technology: CAGE CLAMP®
  • Connection 1 — Actuation Method: Operating tool
  • Connection 1 — Connectable conductor materials: Copper; Aluminum
  • Connection 1 — Connectable conductor materials (note): Terminating Aluminum ConductorsWAGO Spring-Clamp Terminal Blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO Aluminum Contact Paste 249-130 is used for termination. Aluminum Contact Paste Advantages:Automatically destroys the oxide film during clamping.Prevents fresh oxidation at the clamping point.Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).Provides long-term protection against corrosion.; Using terminal blocks with CAGE CLAMP® Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately inserted into the clamping units filled with aluminum contact paste. It is also possible to apply WAGO Aluminum Contact Paste additionally on the whole surface of the aluminum conductor before termination. Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::2.5 mm² = 16 A4 mm² = 22 A
  • Connection 1 — Solid conductor: 0.08 … 4 mm² / 28 … 12 AWG
  • Connection 1 — Fine-stranded conductor: 0.08 … 4 mm² / 28 … 12 AWG
  • Connection 1 — Strip length: 9 … 10 mm / 0.35 … 0.39 inches
  • Connection 1 — Wiring direction: Front-entry wiring
  • Width: 6 mm / 0.236 inches
  • Height: 59 mm / 2.323 inches
  • Depth from upper-edge of DIN-rail: 29 mm / 1.142 inches
  • Design: horizontal type
  • Mounting type: DIN-35 rail
  • Marking level: Center marking
  • Color: red
  • Insulation material (main housing): Polyamide (PA66)
  • Flammability class per UL94: V0
  • Weight: 7.9 g
  • Processing temperature: -35 … +85 °C
  • Continuous operating temperature: -60 … +105 °C

Image shown is representative. Refer to the product specifications for the exact configuration.