Description
The WAGO 2789-9052 communication module features Modbus TCP, communication capability.
Specifications
- Nominal input voltage [V]: 5 VDC (SELV)
- Nominal input current at UN: 250 mA (max.)
- Signaling: 1 x ERR LED (red); 1 x COM OK LED (green); 1 x LED LNK/ACTx (green); 1 x LED SPEEDx (orange)
- Communications: Modbus (TCP, UDP)
- ETHERNET protocols: HTTP(S); BootP; DHCP; SNTP
- Configuration options: Web-Based Management
- Visualization: Web-Visu
- Transmission rate: 100 MBd (ETHERNET: 10/100 Mbit/s)
- Transmission medium (communication/fieldbus): ETHERNET: Twisted pair S-UTP; 100 Ω; Cat. 5
- Test voltage (fieldbus): 0.775 kVAC; 50 Hz; 1 min
- Protection class: III
- Insulation type: Functional insulation
- protection rating: IP20; per EN 60529
- Overvoltage category: III
- Pollution degree: 2
- Connection Data — Cable length (max.): 100 m
- Connection 1 — Connection type: Modbus TCP/UDP
- Connection 1 — Pluggable connector: 2 x RJ-45
- Width: 35 mm / 1.378 inches
- Height: 80 mm / 3.15 inches
- Depth: 22 mm / 0.866 inches
- Note (dimensions): Depth in mounted state
- Mounting type: Snaps onto the communication interface (X4) of a Pro 2 Power Supply
- Weight: 45 g
- Ambient temperature (operation): -40 … +55 °C
- Ambient temperature (storage): -40 … +85 °C
- Relative humidity: 5 … 95 % (no condensation permissible)
- Operating altitude (max.): 5000 m
- Conformity marking: CE
- Standards/specifications: EN 61010-1; EN 61010-2-201; EN 61204-3; UL 61010-1; UL 61010-2-201
Image shown is representative. Refer to the product specifications for the exact configuration.