Description
The WAGO 2716-255 pCB terminal block features lever, 16 mm², Pin spacing 15 mm, 5-pole, CAGE CLAMP®, commoning option, gray.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60664-1
- IEC Approvals — Rated voltage (III / 3): 800 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 8 kV
- IEC Approvals — Rated voltage (III/2): 1000 V
- IEC Approvals — Rated impulse withstand voltage (III/2): 8 kV
- IEC Approvals — Nominal voltage (II/2): 1000 V
- IEC Approvals — Rated impulse withstand voltage (II/2): 8 kV
- IEC Approvals — Rated current: 76 A
- IEC Approvals — Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
- UL Approvals — Approvals per: UL 1059
- UL Approvals — Rated voltage UL (Use Group B): 600 V
- UL Approvals — Rated current UL (Use Group B): 65 A
- UL Approvals — Rated voltage UL (Use Group C): 600 V
- UL Approvals — Rated current UL (Use Group C): 65 A
- Connection Data — Clamping units: 5
- Connection Data — Total number of potentials: 5
- Connection Data — Number of connection types: 1
- Connection Data — Number of levels: 1
- Connection Data — Number of jumper slots: 1
- Connection 1 — Connection technology: CAGE CLAMP®
- Connection 1 — Actuation Method: Lever
- Connection 1 — Solid conductor: 1.5 … 16 mm² / 16 … 6 AWG
- Connection 1 — Fine-stranded conductor: 1.5 … 16 mm² / 16 … 6 AWG
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 1.5 … 10 mm²
- Connection 1 — Fine-stranded conductor; with uninsulated ferrule: 1.5 … 10 mm²
- Connection 1 — Strip length: 12 … 13 mm / 0.47 … 0.51 inches
- Connection 1 — Conductor connection direction to PCB: 30 °
- Connection 1 — Number of poles: 5
- Pin spacing: 15 mm / 0.591 inches
- Width: 70 mm / 2.756 inches
- Height: 33.3 mm / 1.311 inches
- Height from the surface: 28.8 mm / 1.134 inches
- Depth: 35 mm / 1.378 inches
- Solder pin length: 4.5 mm
- Solder pin dimensions: 0.95 x 1.2 mm
- Drilled hole diameter: 1.6 (+0.1) mm
- PCB contact: THT
- Solder pin arrangement: over the entire terminal strip (in-line)
- Number of solder pins per potential: 4
- Color: gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Contact material: Electrolytic copper (ECu)
- Weight: 62.6 g
- Limit temperature range: -60 … +105 °C
- Ambient temperature (installation): -35 … +60 °C
Image shown is representative. Refer to the product specifications for the exact configuration.