Description
The WAGO 2706-305 pCB terminal block features lever, 6 mm², Pin spacing 12.5 mm, 5-pole, CAGE CLAMP®, gray.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60664-1
- IEC Approvals — Rated voltage (III / 3): 1000 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 8 kV
- IEC Approvals — Rated voltage (III/2): 1000 V
- IEC Approvals — Rated impulse withstand voltage (III/2): 8 kV
- IEC Approvals — Nominal voltage (II/2): 1000 V
- IEC Approvals — Rated impulse withstand voltage (II/2): 8 kV
- IEC Approvals — Rated current: 41 A
- IEC Approvals — Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
- UL Approvals — Approvals per: UL 1059
- UL Approvals — Rated voltage UL (Use Group B): 300 V
- UL Approvals — Rated current UL (Use Group B): 30 A
- UL Approvals — Rated voltage UL (Use Group C): 600 V
- UL Approvals — Rated current UL (Use Group C): 30 A
- Connection Data — Clamping units: 5
- Connection Data — Total number of potentials: 5
- Connection Data — Number of connection types: 1
- Connection Data — Number of levels: 1
- Connection 1 — Connection technology: CAGE CLAMP®
- Connection 1 — Actuation Method: Lever
- Connection 1 — Solid conductor: 0.5 … 6 mm² / 20 … 10 AWG
- Connection 1 — Fine-stranded conductor: 0.5 … 6 mm² / 20 … 10 AWG
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.5 … 6 mm²
- Connection 1 — Fine-stranded conductor; with uninsulated ferrule: 0.5 … 6 mm²
- Connection 1 — Strip length: 11 … 12 mm / 0.43 … 0.47 inches
- Connection 1 — Conductor connection direction to PCB: 30 °
- Connection 1 — Number of poles: 5
- Pin spacing: 12.5 mm / 0.492 inches
- Width: 57.5 mm / 2.264 inches
- Height: 30 mm / 1.181 inches
- Height from the surface: 25.5 mm / 1.004 inches
- Depth: 26 mm / 1.024 inches
- Solder pin length: 4.5 mm
- Solder pin dimensions: 1 x 1.4 mm
- Drilled hole diameter: 1.8 (+0.1) mm
- PCB contact: THT
- Solder pin arrangement: over the entire terminal strip (in-line)
- Number of solder pins per potential: 2
- Color: gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Contact material: Electrolytic copper (ECu)
- Weight: 33.6 g
- Limit temperature range: -60 … +105 °C
- Ambient temperature (installation): -35 … +60 °C
Image shown is representative. Refer to the product specifications for the exact configuration.