Description
The WAGO 2624-1111 pCB terminal block features Push-in CAGE CLAMP with operating lever, AWG 24 - 12, Pin spacing 5 mm, 11-pole, side entry, gray.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60664-1
- IEC Approvals — Rated voltage (III / 3): 320 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 4 kV
- IEC Approvals — Rated voltage (III/2): 400 V
- IEC Approvals — Rated impulse withstand voltage (III/2): 4 kV
- IEC Approvals — Nominal voltage (II/2): 630 V
- IEC Approvals — Rated impulse withstand voltage (II/2): 4 kV
- IEC Approvals — Rated current: 41 A
- IEC Approvals — Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
- UL Approvals — Approvals per: UL 1059
- UL Approvals — Rated voltage UL (Use Group B): 300 V
- UL Approvals — Rated current UL (Use Group B): 26 A
- UL Approvals — Rated voltage UL (Use Group D): 300 V
- UL Approvals — Rated current UL (Use Group D): 10 A
- Approvals per: CSA
- Rated voltage CSA (Use Group B): 300 V
- Rated current CSA (Use Group B): 26 A
- Rated voltage CSA (Use Group D): 300 V
- Rated current CSA (Use Group D): 5 A
- Connection Data — Clamping units: 11
- Connection Data — Total number of potentials: 11
- Connection Data — Number of connection types: 1
- Connection Data — Number of levels: 1
- Connection 1 — Connection technology: Push-in CAGE CLAMP®
- Connection 1 — Actuation Method: Operating tool
- Connection 1 — Solid conductor: 0.2 … 6 mm² / 24 … 10 AWG
- Connection 1 — Fine-stranded conductor: 0.2 … 6 mm² / 24 … 10 AWG
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.25 … 2.5 mm²
- Connection 1 — Fine-stranded conductor; with uninsulated ferrule: 0.25 … 2.5 mm²
- Connection 1 — Fine-stranded conductor; with twin ferrule: 0.25 … 1.5 mm²
- Connection 1 — Strip length: 10 … 12 mm / 0.39 … 0.47 inches
- Connection 1 — Conductor connection direction to PCB: 0 °
- Connection 1 — Number of poles: 11
- Pin spacing: 5 mm / 0.197 inches
- Width: 56.5 mm / 2.224 inches
- Height: 19.4 mm / 0.764 inches
- Height from the surface: 15.4 mm / 0.606 inches
- Depth: 16.3 mm / 0.642 inches
- Solder pin length: 4 mm
- Solder pin dimensions: 0.8 x 1 mm
- Drilled hole diameter: 1.3 (+0.1) mm
- Mounting type: Feed-through mounting
- Suitable for through-panel applications: Yes
- PCB contact: THT
- Solder pin arrangement: over the entire terminal strip (in-line)
- Number of solder pins per potential: 2
- Color: gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Contact material: Electrolytic copper (ECu)
- Weight: 17.1 g
- Limit temperature range: -60 … +105 °C
- Ambient temperature (installation): -35 … +60 °C
- Processing temperature: -35 … +60 °C
- Continuous operating temperature: -60 … +105 °C
Installation: Supply with WAGO installation instructions and follow the manufacturer’s technical ratings and installation requirements.
Image shown is representative. Refer to the product specifications for the exact configuration.