Description
The WAGO 2604-1105 pCB terminal block features Push-in CAGE CLAMP with operating lever, AWG 24 - 12, Pin spacing 5 mm, 5-pole, side entry, gray.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60664-1
- IEC Approvals — Rated voltage (III / 3): 320 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 4 kV
- IEC Approvals — Rated voltage (III/2): 400 V
- IEC Approvals — Rated impulse withstand voltage (III/2): 4 kV
- IEC Approvals — Nominal voltage (II/2): 630 V
- IEC Approvals — Rated impulse withstand voltage (II/2): 4 kV
- IEC Approvals — Rated current: 32 A
- IEC Approvals — Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
- UL Approvals — Approvals per: UL 1059
- UL Approvals — Rated voltage UL (Use Group B): 300 V
- UL Approvals — Rated current UL (Use Group B): 20 A
- UL Approvals — Rated voltage UL (Use Group D): 300 V
- UL Approvals — Rated current UL (Use Group D): 10 A
- Approvals per: CSA
- Rated voltage CSA (Use Group B): 300 V
- Rated current CSA (Use Group B): 20 A
- Rated voltage CSA (Use Group D): 300 V
- Rated current CSA (Use Group D): 5 A
- Connection Data — Clamping units: 5
- Connection Data — Total number of potentials: 5
- Connection Data — Number of connection types: 1
- Connection Data — Number of levels: 1
- Connection 1 — Connection technology: Push-in CAGE CLAMP®
- Connection 1 — Actuation Method: Lever
- Connection 1 — Solid conductor: 0.2 … 4 mm² / 24 … 12 AWG
- Connection 1 — Fine-stranded conductor: 0.2 … 4 mm² / 24 … 12 AWG
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.25 … 2.5 mm²
- Connection 1 — Fine-stranded conductor; with uninsulated ferrule: 0.25 … 2.5 mm²
- Connection 1 — Fine-stranded conductor; with twin ferrule: 0.25 … 1.5 mm²
- Connection 1 — Strip length: 9 … 11 mm / 0.35 … 0.43 inches
- Connection 1 — Conductor connection direction to PCB: 0 °
- Connection 1 — Number of poles: 5
- Pin spacing: 5 mm / 0.197 inches
- Width: 27.4 mm / 1.079 inches
- Height: 20.7 mm / 0.815 inches
- Height from the surface: 16.7 mm / 0.657 inches
- Depth: 19.2 mm / 0.756 inches
- Solder pin length: 4 mm
- Solder pin dimensions: 0.8 x 1 mm
- Drilled hole diameter: 1.3 (+0.1) mm
- PCB contact: THT
- Solder pin arrangement: over the entire terminal strip (in-line)
- Number of solder pins per potential: 2
- Color: gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Contact material: Electrolytic copper (ECu)
- Actuator color: orange
- Weight: 7.7 g
- Limit temperature range: -60 … +105 °C
- Ambient temperature (installation): -35 … +60 °C
- Processing temperature: -35 … +60 °C
- Continuous operating temperature: -60 … +105 °C
- Test specification: ; Railway applications –; Rolling stock –; Electronic equipment: DIN EN 50155 (VDE 0115-200):2022-06
- Test procedure: ; Railway applications – ; Rolling stock equipment – ; Vibration and shock tests: DIN EN 61373 (VDE 0115-0106):2011-04
- Spectrum/Mounting location: Service life test, Category 1, Class A/B
- Functional test with noise-like oscillations: Test passed according to Section 8 of the standard
- Frequency: f1 = 5 Hz to f2 = 150 Hz
- Acceleration: 0.101g (highest test level used for all axes)
- Test duration per axis: 10 min.
- Test directions: X, Y and Z axes
- Monitoring of contact faults and interruptions: Passed
- Voltage drop measurement before and after each axis: Passed
- Simulated service life test through increased levels of noise-like oscillations: Test passed according to Section 9 of the standard
- Acceleration: 0.572g (highest test level used for all axes)
- Test duration per axis: 5 h
- Extended testing: Monitoring of contact faults and interruptions: Passed
- Extended testing: Voltage drop measurement before and after each axis: Passed
- Shock test: Test passed according to Section 10 of the standard
- Shock pulse form: Half sine
- Acceleration: 5g (highest test level used for all axes)
- Shock duration: 30 ms
- Number of shocks (per axis): 3 pos. und 3 neg.
- Vibration and shock stress for rolling stock equipment: Passed
Installation: Supply with WAGO installation instructions and follow the manufacturer’s technical ratings and installation requirements.
Image shown is representative. Refer to the product specifications for the exact configuration.