Description
The WAGO 250-105 pCB terminal block features push-button, 1.5 mm², Pin spacing 3.5 mm, 5-pole, Push-in CAGE CLAMP®, gray.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60664-1
- IEC Approvals — Rated voltage (III / 3): 160 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 2.5 kV
- IEC Approvals — Rated voltage (III/2): 160 V
- IEC Approvals — Rated impulse withstand voltage (III/2): 2.5 kV
- IEC Approvals — Nominal voltage (II/2): 320 V
- IEC Approvals — Rated impulse withstand voltage (II/2): 2.5 kV
- IEC Approvals — Rated current: 8 A
- IEC Approvals — Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
- UL Approvals — Approvals per: UL 1059
- UL Approvals — Rated voltage UL (Use Group B): 300 V
- UL Approvals — Rated current UL (Use Group B): 5 A
- UL Approvals — Rated voltage UL (Use Group D): 300 V
- UL Approvals — Rated current UL (Use Group D): 5 A
- Approvals per: CSA
- Rated voltage CSA (Use Group B): 300 V
- Rated current CSA (Use Group B): 10 A
- Rated voltage CSA (Use Group D): 300 V
- Rated current CSA (Use Group D): 10 A
- Connection Data — Clamping units: 5
- Connection Data — Total number of potentials: 5
- Connection Data — Number of connection types: 1
- Connection Data — Number of levels: 1
- Connection 1 — Connection technology: Push-in CAGE CLAMP®
- Connection 1 — Actuation Method: Push-button
- Connection 1 — Solid conductor: 0.2 … 1.5 mm² / 24 … 16 AWG
- Connection 1 — Fine-stranded conductor: 0.2 … 1.5 mm² / 24 … 16 AWG
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.25 … 1 mm²
- Connection 1 — Fine-stranded conductor; with uninsulated ferrule: 0.25 … 1 mm²
- Connection 1 — Strip length: 8.5 … 9.5 mm / 0.33 … 0.37 inches
- Connection 1 — Conductor connection direction to PCB: 45 °
- Connection 1 — Number of poles: 5
- Pin spacing: 3.5 mm / 0.138 inches
- Width: 19 mm / 0.748 inches
- Height: 16.7 mm / 0.657 inches
- Height from the surface: 13.1 mm / 0.516 inches
- Depth: 12 mm / 0.472 inches
- Solder pin length: 3.4 mm
- Solder pin dimensions: 0.4 x 0.75 mm
- Drilled hole diameter: 1.1 (+0.1) mm
- PCB contact: THT
- Solder pin arrangement: over the entire terminal strip (in-line)
- Number of solder pins per potential: 1
- Color: gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 2.5 g
- Limit temperature range: -60 … +105 °C
- Ambient temperature (installation): -35 … +60 °C
Installation: Supply with WAGO installation instructions and follow the manufacturer’s technical ratings and installation requirements.
Image shown is representative. Refer to the product specifications for the exact configuration.