Description
The WAGO 234-202 pCB terminal block features push-button, 0.5 mm², Pin spacing 2.5 mm, 2-pole, CAGE CLAMP®, gray.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60664-1
- IEC Approvals — Rated voltage (III / 3): 63 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 2.5 kV
- IEC Approvals — Rated voltage (III/2): 160 V
- IEC Approvals — Rated impulse withstand voltage (III/2): 2.5 kV
- IEC Approvals — Nominal voltage (II/2): 320 V
- IEC Approvals — Rated impulse withstand voltage (II/2): 2.5 kV
- IEC Approvals — Rated current: 6 A
- IEC Approvals — Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
- UL Approvals — Approvals per: UL 1059
- UL Approvals — Rated voltage UL (Use Group B): 150 V
- UL Approvals — Rated current UL (Use Group B): 4 A
- Approvals per: CSA
- Rated voltage CSA (Use Group B): 150 V
- Rated current CSA (Use Group B): 4 A
- Connection Data — Clamping units: 2
- Connection Data — Total number of potentials: 2
- Connection Data — Number of connection types: 1
- Connection Data — Number of levels: 1
- Connection 1 — Connection technology: CAGE CLAMP®
- Connection 1 — Actuation Method: Push-button
- Connection 1 — Solid conductor: 0.08 … 0.5 mm² / 28 … 20 AWG
- Connection 1 — Fine-stranded conductor: 0.08 … 0.5 mm² / 28 … 20 AWG
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.25 mm²
- Connection 1 — Fine-stranded conductor; with uninsulated ferrule: 0.25 mm²
- Connection 1 — Strip length: 5 … 6 mm / 0.2 … 0.24 inches
- Connection 1 — Conductor connection direction to PCB: 90 °
- Connection 1 — Number of poles: 2
- Pin spacing: 2.5 mm / 0.098 inches
- Width: 7.2 mm / 0.283 inches
- Height: 18 mm / 0.709 inches
- Height from the surface: 14 mm / 0.551 inches
- Depth: 14.4 mm / 0.567 inches
- Solder pin length: 4 mm
- Solder pin dimensions: 0.5 x 0.75 mm
- Drilled hole diameter: 1.1 (+0.1) mm
- PCB contact: THT
- Solder pin arrangement: over the entire terminal strip (in-line)
- Number of solder pins per potential: 2
- Color: gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Contact material: Electrolytic copper (ECu)
- Weight: 1.1 g
- Limit temperature range: -60 … +105 °C
- Ambient temperature (installation): -35 … +60 °C
Image shown is representative. Refer to the product specifications for the exact configuration.