null

WAGO 233-206 PCB terminal block, push-button, 0.5 mm², Pin spacing 2.5 mm, 6-pole, CAGE CLAMP®, gray

$3.56
SKU:
233-206
Shipping:
Calculated at Checkout
interval quantity:
70
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 233-206 pCB terminal block features push-button, 0.5 mm², Pin spacing 2.5 mm, 6-pole, CAGE CLAMP®, gray.

Specifications

  • IEC Approvals — Ratings per: IEC/EN 60664-1
  • IEC Approvals — Rated voltage (III / 3): 63 V
  • IEC Approvals — Rated impulse withstand voltage (III / 3): 2.5 kV
  • IEC Approvals — Rated voltage (III/2): 160 V
  • IEC Approvals — Rated impulse withstand voltage (III/2): 2.5 kV
  • IEC Approvals — Nominal voltage (II/2): 320 V
  • IEC Approvals — Rated impulse withstand voltage (II/2): 2.5 kV
  • IEC Approvals — Rated current: 6 A
  • IEC Approvals — Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
  • UL Approvals — Approvals per: UL 1059
  • UL Approvals — Rated voltage UL (Use Group B): 150 V
  • UL Approvals — Rated current UL (Use Group B): 4 A
  • Approvals per: CSA
  • Rated voltage CSA (Use Group B): 150 V
  • Rated current CSA (Use Group B): 4 A
  • Connection Data — Clamping units: 6
  • Connection Data — Total number of potentials: 6
  • Connection Data — Number of connection types: 1
  • Connection Data — Number of levels: 1
  • Connection 1 — Connection technology: CAGE CLAMP®
  • Connection 1 — Actuation Method: Push-button
  • Connection 1 — Solid conductor: 0.08 … 0.5 mm² / 28 … 20 AWG
  • Connection 1 — Fine-stranded conductor: 0.08 … 0.5 mm² / 28 … 20 AWG
  • Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.25 mm²
  • Connection 1 — Fine-stranded conductor; with uninsulated ferrule: 0.25 mm²
  • Connection 1 — Note (conductor cross-section): Terminating 0.75 mm²/18 AWG conductors is possible; however insulation diameter allows only every other clamping unit to be terminated with this conductor size.
  • Connection 1 — Strip length: 5 … 6 mm / 0.2 … 0.24 inches
  • Connection 1 — Conductor connection direction to PCB: 30 °
  • Connection 1 — Number of poles: 6
  • Pin spacing: 2.5 mm / 0.098 inches
  • Width: 17.3 mm / 0.681 inches
  • Height: 19.5 mm / 0.768 inches
  • Height from the surface: 15.5 mm / 0.61 inches
  • Depth: 13.9 mm / 0.547 inches
  • Solder pin length: 4 mm
  • Solder pin dimensions: 0.5 x 0.75 mm
  • Drilled hole diameter: 1.1 (+0.1) mm
  • PCB contact: THT
  • Solder pin arrangement: over the entire terminal strip (in-line)
  • Number of solder pins per potential: 2
  • Color: gray
  • Insulation material (main housing): Polyamide (PA66)
  • Flammability class per UL94: V0
  • Contact material: Electrolytic copper (ECu)
  • Weight: 2.5 g
  • Limit temperature range: -60 … +105 °C
  • Ambient temperature (installation): -35 … +60 °C

Image shown is representative. Refer to the product specifications for the exact configuration.