Description
The WAGO 231-127 testing plug module with contact stud features for 236 Series, Pin spacing 5 mm / 0.197 in, 2,50 mm², gray.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60664-1
- IEC Approvals — Rated voltage (III/2): 250 V
- IEC Approvals — Rated impulse withstand voltage (III/2): 2.5 kV
- IEC Approvals — Rated current: 0.5 A
- IEC Approvals — Legend (ratings): (III / 2) ≙ Overvoltage category III / Pollution degree 2
- Connection Data — Clamping units: 1
- Connection Data — Total number of potentials: 1
- Connection Data — Number of connection types: 1
- Connection 1 — Connection technology: CAGE CLAMP®
- Connection 1 — Solid conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
- Connection 1 — Fine-stranded conductor: 0.08 … 2.5 mm² / 28 … 12 AWG
- Connection 1 — Strip length: 12 … 13 mm / 0.47 … 0.51 inches
- Pin spacing: 5 mm / 0.197 inches
- Width: 5 mm / 0.197 inches
- Height: 14.3 mm / 0.563 inches
- Depth: 36.45 mm / 1.435 inches
- Use: Testing without connected conductor
- Test contact length: 10 mm
- Suitable: for 236 Series
- Color: gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Contact material: Electrolytic copper (ECu)
- Weight: 1.9 g
- Limit temperature range: -60 … +105 °C
- Ambient temperature (installation): -35 … +60 °C
- Processing temperature: -35 … +60 °C
Image shown is representative. Refer to the product specifications for the exact configuration.