Description
The WAGO 2250-311 tOPJOB®S miniature feedthrough terminal block with Push-buttons features snap-in mounting foot, 2-conductor, 3.5 mm wide, gray.
Specifications
- IEC Approvals — Ratings per: IEC/EN 60998-2-2
- IEC Approvals — Rated voltage (III / 3): 500 V
- IEC Approvals — Rated impulse withstand voltage (III / 3): 6 kV
- IEC Approvals — Rated current: 13.5 A
- IEC Approvals — Current at conductor cross-section (max.) mm²: 17.5 A
- IEC Approvals — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
- UL Approvals — Approvals per: UL 1059
- UL Approvals — Rated voltage UL (Use Group B): 300 V
- UL Approvals — Rated current UL (Use Group B): 10 A
- UL Approvals — Rated voltage UL (Use Group C): 300 V
- UL Approvals — Rated current UL (Use Group C): 10 A
- Approvals per: CSA 22.2 No 158
- Rated voltage CSA (Use Group B): 300 V
- Rated current CSA (Use Group B): 10 A
- Rated voltage CSA (Use Group C): 300 V
- Rated current CSA (Use Group C): 10 A
- Reference to hazardous areas: See “Downloads – Documentation – Additional Information: Technical Section; Technical Explications”
- Ratings per: ATEX: PTB 19 ATEX 1019 U / IECEx: PTB 19.0050U (Ex eb IIC Gb)
- Rated voltage EN (Ex e II): 352 V
- Rated current (Ex e II): 13.5 A
- Rated current (Ex e II) with jumper: 12 A
- Power loss, per pole (potential): 0.434 W
- Rated current IN for power loss specification: 13.5 A
- Resistance value for specified, current-dependent power loss: 0.002 Ω
- General information — Wiring direction: Front-entry wiring
- Connection Data — Clamping units: 2
- Connection Data — Total number of potentials: 1
- Connection Data — Number of levels: 1
- Connection Data — Number of jumper slots: 1
- Connection 1 — Connection technology: Push-in CAGE CLAMP®
- Connection 1 — Actuation Method: Push-button
- Connection 1 — Connectable conductor materials: Copper
- Connection 1 — Nominal cross-section: 1 mm²
- Connection 1 — Solid conductor: 0.14 … 1.5 mm² / 24 … 16 AWG
- Connection 1 — Solid conductor; push-in termination: 0.5 … 1.5 mm² / 20 … 16 AWG
- Connection 1 — Fine-stranded conductor: 0.14 … 1.5 mm² / 24 … 16 AWG
- Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.14 … 1 mm² / 24 … 18 AWG
- Connection 1 — Fine-stranded conductor; with uninsulated ferrule: 0.14 … 1 mm² / 24 … 18 AWG
- Connection 1 — Fine-stranded conductor; with ferrule; push-in termination: 0.5 … 1 mm² / 20 … 18 AWG
- Connection 1 — Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
- Connection 1 — Strip length: 9 … 11 mm / 0.35 … 0.43 inches
- Connection 1 — Wiring direction: Front-entry wiring
- Width: 3.5 mm / 0.138 inches
- Height from the surface: 27.2 mm / 1.071 inches
- Depth: 33.2 mm / 1.307 inches
- Mounting type: Snap-in foot
- Marking level: Center/side marking
- Color: gray
- Insulation material (main housing): Polyamide (PA66)
- Flammability class per UL94: V0
- Weight: 2.4 g
- Processing temperature: -35 … +85 °C
- Continuous operating temperature: -60 … +105 °C
Image shown is representative. Refer to the product specifications for the exact configuration.