null

WAGO 2202-3201 Triple-deck terminal block, with push-button, Through/through/through terminal block, L/L/L, without marker carrier, suitable for Ex e II applications, for DIN-rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2,50 mm², gray

$7.53
SKU:
2202-3201
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 2202-3201 triple-deck terminal block features with push-button, Through/through/through terminal block, L/L/L, without marker carrier, suitable for Ex e II applications, for DIN-rail 35 x 15 and 35 x 7.5, 2.5 mm², Push-in CAGE CLAMP®, 2,50 mm², gray.

Specifications

  • IEC Approvals — Ratings per: IEC/EN 60947-7-1
  • IEC Approvals — Rated voltage (III / 3): 500 V
  • IEC Approvals — Rated impulse withstand voltage (III / 3): 6 kV
  • IEC Approvals — Rated current: 22 A
  • IEC Approvals — Current at conductor cross-section (max.) mm²: 26 A
  • IEC Approvals — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
  • Reference to hazardous areas: See “Downloads – Documentation – Additional Information: Technical Section; Technical Explications”
  • Rated voltage EN (Ex e II): 440 V
  • Rated current (Ex e II): 19 A
  • Rated current (Ex e II) with jumper: 17 A
  • Power loss, per pole (potential): 0.644 W
  • Rated current IN for power loss specification: 22 A
  • Resistance value for specified, current-dependent power loss: 0.001 Ω
  • General information — Wiring direction: Front-entry wiring
  • Connection Data — Clamping units: 6
  • Connection Data — Total number of potentials: 3
  • Connection Data — Number of levels: 3
  • Connection Data — Number of jumper slots: 6
  • Connection 1 — Connection technology: Push-in CAGE CLAMP®
  • Connection 1 — Total number of connection points: 3
  • Connection 1 — Actuation Method: Push-button
  • Connection 1 — Connectable conductor materials: Copper
  • Connection 1 — Nominal cross-section: 2.5 mm²
  • Connection 1 — Solid conductor: 0.25 … 4 mm² / 22 … 12 AWG
  • Connection 1 — Solid conductor; push-in termination: 0.75 … 4 mm² / 18 … 12 AWG
  • Connection 1 — Fine-stranded conductor: 0.25 … 4 mm² / 22 … 12 AWG
  • Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.25 … 2.5 mm² / 22 … 14 AWG
  • Connection 1 — Fine-stranded conductor; with ferrule; push-in termination: 1 … 2.5 mm² / 18 … 14 AWG
  • Connection 1 — Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
  • Connection 1 — Strip length: 10 … 12 mm / 0.39 … 0.47 inches
  • Connection 1 — Wiring direction: Front-entry wiring
  • Connection 2 — Number of connection points: 3
  • Width: 5.2 mm / 0.205 inches
  • Height: 93.6 mm / 3.685 inches
  • Depth from upper-edge of DIN-rail: 69.5 mm / 2.736 inches
  • Potential Marking: L/L/L
  • Mounting type: DIN-35 rail
  • Marking level: Center/side marking
  • Color: gray
  • Insulation material (main housing): Polyamide (PA66)
  • Flammability class per UL94: V0
  • Actuator color: orange
  • Weight: 17.5 g
  • Processing temperature: -35 … +85 °C
  • Continuous operating temperature: -60 … +105 °C

Image shown is representative. Refer to the product specifications for the exact configuration.