WAGO 2202-1901 2-conductor through terminal block, with push-button, 2.5 mm², with test option, with additional jumper position, same profile as 2-conductor disconnect terminal block, side and center marking, for DIN-rail 35 x 15 and 35 x 7.5,.

The WAGO 2202-1901 TOPJOB® S 2-conductor through terminal block features with push-button, 2.5 mm², with test option, with additional jumper position, same profile as 2-conductor disconnect terminal block, side and center marking, for DIN-rail 35 x 15 and 35 x 7.5, Push-in CAGE CLAMP®, 2,50 mm², gray.

Specifications

• Ratings per IEC/EN — Ratings per: IEC/EN 60947-7-1
• Ratings per IEC/EN — Nominal voltage (III/3): 400V
• Ratings per IEC/EN — Rated impulse withstand voltage (III / 3): 6kV
• Ratings per IEC/EN — Rated current: 16A
• Ratings per IEC/EN — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
• Ratings per UL — Approvals per: UL 1059
• Ratings per UL — Rated voltage UL (Use Group B): 300V
• Ratings per UL — Rated current UL (Use Group B): 15A
• Ratings per UL — Rated voltage UL (Use Group C): 300V
• Ratings per UL — Rated current UL (Use Group C): 15A
• Ratings per CSA — Approvals per: CSA 22.2 No 158
• Ratings per CSA — Rated voltage CSA (Use Group B): 300V
• Ratings per CSA — Rated current CSA (Use Group B): 15A
• Ratings per CSA — Rated voltage CSA (Use Group C): 300V
• Ratings per CSA — Rated current CSA (Use Group C): 15A
• Reference to hazardous areas: See “Downloads – Documentation – Additional Information: Technical Section; Technical Explications”
• Ratings per: ATEX: PTB 20 ATEX 1007 U / IECEx: PTB 20.0013U (Ex ec IIC Gc)
• Rated voltage EN (Ex e II): 440V
• Rated current (Ex e II): 17A
• Power loss, per pole (potential): 0.341W
• Rated current IN for power loss specification: 16A
• Resistance value for specified, current-dependent power loss: 0.001Ω
• General information — Wiring direction: Front-entry wiring
• Connection Data — Clamping units: 2
• Connection Data — Total number of potentials: 1
• Connection Data — Number of levels: 1
• Connection Data — Number of jumper slots: 3
• Connection 1 — Connection technology: Push-in CAGE CLAMP®
• Connection 1 — Actuation Method: Push-button
• Connection 1 — Connectable conductor materials: Copper
• Connection 1 — Nominal cross-section: 2.5 mm²
• Connection 1 — Solid conductor: 0.25 … 4 mm² / 22 … 12 AWG
• Connection 1 — Solid conductor; push-in termination: 0.75 … 4 mm² / 18 … 12 AWG
• Connection 1 — Stranded conductor: 0.25 … 4 mm² / 22 … 12 AWG
• Connection 1 — Fine-stranded conductor: 0.25 … 4 mm² / 22 … 12 AWG
• Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.25 … 2.5 mm² / 22 … 14 AWG
• Connection 1 — Fine-stranded conductor; with ferrule; push-in termination: 1 … 2.5 mm² / 18 … 14 AWG
• Connection 1 — Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
• Connection 1 — Strip length: 10 … 12 mm / 0.39 … 0.47 inches
• Connection 1 — Wiring direction: Front-entry wiring
• Width: 5.2 mm / 0.205 inches
• Height: 72.9 mm / 2.87 inches
• Depth from upper-edge of DIN-rail: 32.9 mm / 1.295 inches
• Depth: 39.5 mm / 1.555 inches
• Mounting type: DIN-35 rail
• Marking level: Center/side marking
• Color: gray
• Insulation material (main housing): Polyamide (PA66)
• Flammability class per UL94: V0
• Actuator color: orange
• Weight: 8.4g
• Processing temperature: -35 … +85 °C
• Continuous operating temperature: -60 … +105 °C