null

WAGO 2202-1711 TOPJOB®S fuse terminal block with Push-buttons, with pivoting fuse holder for 5 x 20 mm miniature metric fuse, without blown fuse indication, rail mount, 3-conductor, 5.2 mm wide, gray

$12.70
SKU:
2202-1711
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 2202-1711 tOPJOB®S fuse terminal block with Push-buttons features with pivoting fuse holder for 5 x 20 mm miniature metric fuse, without blown fuse indication, rail mount, 3-conductor, 5.2 mm wide, gray.

Specifications

  • IEC Approvals — Ratings per: IEC/EN 60947-7-3
  • IEC Approvals — Rated voltage (III / 3): 250 V
  • IEC Approvals — Rated impulse withstand voltage (III / 3): 6 kV
  • IEC Approvals — Rated current: 6.3 A
  • IEC Approvals — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
  • Ratings per IEC/EN – Notes — Ratings (note): Electrical ratings are given by the fuse.
  • UL Approvals — Approvals per: UL 1059
  • UL Approvals — Rated voltage UL (Use Group B): 250 V
  • UL Approvals — Rated current UL (Use Group B): 10 A
  • UL Approvals — Rated voltage UL (Use Group C): 250 V
  • UL Approvals — Rated current UL (Use Group C): 10 A
  • UL Approvals — Rated voltage UL (Use Group D): 250 V
  • Approvals per: CSA 22.2 No 158
  • Rated voltage CSA (Use Group B): 250 V
  • Rated current CSA (Use Group B): 10 A
  • Rated voltage CSA (Use Group C): 250 V
  • Rated current CSA (Use Group C): 10 A
  • Rated voltage CSA (Use Group D): 250 V
  • Rated current CSA (Use Group D): 10 A
  • Reference to hazardous areas: See “Downloads – Documentation – Additional Information: Technical Section; Technical Explications”
  • Ratings per: ATEX: PTB 20 ATEX 1007 U / IECEx: PTB 20.0013U (Ex ec IIC Gc)
  • Rated voltage EN (Ex e II): 275 V
  • Rated current (Ex e II): 6.3 A
  • Power loss Ploss (max.) (note): When selecting glass cartridge fuses, make sure that the maximum power loss listed below is not exceeded. The power loss is determined according to IEC or EN 60947-7-3/VDE 0611-6 at 23°C. The temperature rise of the terminal block must be checked according to their application and mounting. Higher ambient temperatures represent an additional impact on miniature fuses. Therefore, in such applications, the rated current must be reduced if necessary. More details are available from the manufacturers.
  • Maximum power loss Ploss of fuse insert for overload and short-circuit protection (individual arrangement): 1.6 W
  • Maximum power loss Ploss of fuse insert for overload and short-circuit protection (block arrangement): 1.6 W
  • Maximum power loss Ploss of fuse insert for short-circuit protection (individual arrangement): 1.6 W
  • Power loss Ploss (max.) of fuse cartridge for short-circuit protection (block arrangement): 1.6 W
  • General information — Fuse receptacle: pivoting
  • General information — Fuse type: Cylindrical fuse; 5 x 20 mm
  • General information — Wiring direction: Front-entry wiring
  • Connection Data — Clamping units: 3
  • Connection Data — Total number of potentials: 1
  • Connection Data — Number of levels: 1
  • Connection Data — Number of jumper slots: 2
  • Connection 1 — Connection technology: Push-in CAGE CLAMP®
  • Connection 1 — Actuation Method: Push-button
  • Connection 1 — Connectable conductor materials: Copper
  • Connection 1 — Nominal cross-section: 2.5 mm²
  • Connection 1 — Solid conductor: 0.25 … 4 mm² / 22 … 12 AWG
  • Connection 1 — Solid conductor; push-in termination: 0.75 … 4 mm² / 18 … 12 AWG
  • Connection 1 — Fine-stranded conductor: 0.25 … 4 mm² / 22 … 12 AWG
  • Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.25 … 2.5 mm² / 22 … 14 AWG
  • Connection 1 — Fine-stranded conductor; with ferrule; push-in termination: 1 … 2.5 mm² / 18 … 14 AWG
  • Connection 1 — Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
  • Connection 1 — Strip length: 10 … 12 mm / 0.39 … 0.47 inches
  • Connection 1 — Wiring direction: Front-entry wiring
  • Width: 6.2 mm / 0.244 inches
  • Height: 76.8 mm / 3.024 inches
  • Depth from upper-edge of DIN-rail: 57.6 mm / 2.268 inches
  • Mounting type: DIN-35 rail
  • Marking level: Center/side marking
  • Color: gray
  • Insulation material (main housing): Polyamide (PA66)
  • Flammability class per UL94: V0
  • Actuator color: orange
  • Weight: 14.9 g
  • Processing temperature: -35 … +85 °C
  • Continuous operating temperature: -60 … +105 °C

Image shown is representative. Refer to the product specifications for the exact configuration.