null

WAGO 2110-5201 TOPJOB®S feedthrough terminal block with Lever and Push-button, rail mount, 2-conductor, 10 mm wide, gray

$7.38
SKU:
2110-5201
Shipping:
Calculated at Checkout
In Stock
Available
Before Ordering

Availability and lead times may vary. Request a quote if you need to confirm availability before placing your order.


Manufacturer Information

Wago orders require a $100 combined minimum order.

Family Owned Since 1932
Nationwide Shipping Serving all 50 states
Technical Support Product selection assistance
Project Assistance Quotes and sourcing support

Description

The WAGO 2110-5201 tOPJOB®S feedthrough terminal block with Lever and Push-button features rail mount, 2-conductor, 10 mm wide, gray.

Specifications

  • IEC Approvals — Ratings per: IEC/EN 60947-7-1
  • IEC Approvals — Rated voltage (III / 3): 800 V
  • IEC Approvals — Rated impulse withstand voltage (III / 3): 8 kV
  • IEC Approvals — Rated current: 57 A
  • IEC Approvals — Current at conductor cross-section (max.) mm²: 74 A
  • IEC Approvals — Legend (ratings): (III / 3) ≙ Overvoltage category III / Pollution degree 3
  • UL Approvals — Approvals per: UL 1059
  • UL Approvals — Rated voltage UL (Use Group B): 600 V
  • UL Approvals — Rated current UL (Use Group B): 65 A
  • UL Approvals — Rated voltage UL (Use Group C): 600 V
  • UL Approvals — Rated current UL (Use Group C): 65 A
  • Reference to hazardous areas: See “Downloads – Documentation – Additional Information: Technical Section; Technical Explications”
  • Ratings per: ATEX: PTB 19 ATEX 1017 U / IECEx: PTB 19.0047U (Ex eb IIC Gb)
  • Rated voltage EN (Ex e II): 550 V
  • Rated current (Ex e II): 57 A
  • Rated current (Ex e II) with jumper: 50 A
  • Power loss, per pole (potential): 1.819 W
  • Rated current IN for power loss specification: 57 A
  • Resistance value for specified, current-dependent power loss: 0.001 Ω
  • General information — Wiring direction: Front-entry wiring
  • Connection Data — Clamping units: 2
  • Connection Data — Total number of potentials: 1
  • Connection Data — Number of levels: 1
  • Connection Data — Number of jumper slots: 2
  • Connection 1 — Connection technology: Push-in CAGE CLAMP®
  • Connection 1 — Actuation Method: Lever
  • Connection 1 — Connectable conductor materials: Copper
  • Connection 1 — Nominal cross-section: 10 mm²
  • Connection 1 — Solid conductor: 0.5 … 16 mm² / 20 … 6 AWG
  • Connection 1 — Solid conductor; push-in termination: 4 … 16 mm² / 14 … 6 AWG
  • Connection 1 — Stranded conductor: 0.5 … 16 mm² / 20 … 6 AWG
  • Connection 1 — Fine-stranded conductor: 0.5 … 16 mm² / 20 … 6 AWG
  • Connection 1 — Fine-stranded conductor; with insulated ferrule: 0.5 … 10 mm² / 20 … 8 AWG
  • Connection 1 — Fine-stranded conductor; with ferrule; push-in termination: 4 … 10 mm² / 12 … 8 AWG
  • Connection 1 — Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination. ; AWG specifications were converted according to IEC.
  • Connection 1 — Strip length: 17 … 19 mm / 0.67 … 0.75 inches
  • Connection 1 — Wiring direction: Front-entry wiring
  • Connection 2 — Actuation type: Push-button
  • Width: 10 mm / 0.394 inches
  • Height: 89 mm / 3.504 inches
  • Depth from upper-edge of DIN-rail: 36.9 mm / 1.453 inches
  • Depth: 43.7 mm / 1.72 inches
  • Mounting type: DIN-35 rail
  • Marking level: Center/side marking
  • Color: gray
  • Insulation material (main housing): Polyamide (PA66)
  • Flammability class per UL94: V0
  • Actuator color: orange
  • Weight: 25.7 g
  • Processing temperature: -35 … +85 °C
  • Continuous operating temperature: -60 … +105 °C

Image shown is representative. Refer to the product specifications for the exact configuration.